Претраживање
Приказ резултата 11-20 од 35
Bimetallic alginate nanocomposites: New antimicrobial biomaterials for biomedical application
(Elsevier Science Bv, Amsterdam, 2018)
Two bimetallic (Zn/Cu) alginate based nanocomposites, impregnated with carbonate or phosphate mineral phase, were prepared by a facile procedure. Mineralized samples exhibited different morphologies and properties when ...
Two-step microwave sintering-A promising technique for the processing of nanostructured bioceramics
(Elsevier Science Bv, Amsterdam, 2013)
Two-step microwave sintering was applied in this study to process dense nano-structured bioceramics coupled with improved mechanical properties. The decrease in the average grain size to the nanolevel resulting from ...
Ultra-high pressure densification and properties of nanostructured SiC
(Elsevier Science Bv, Amsterdam, 2016)
Cubic SiC nano-powder particles were synthesized by a sal-gel process with an average grains size of 9.5 nm which were subsequently densified by using a high-pressure "anvil-type with hollows" apparatus at a pressure of 4 ...
Copper nanoparticles with high antimicrobial activity
(Elsevier Science Bv, Amsterdam, 2014)
Copper (Cu) hydrosol containing small nanoparticles (NPs) (similar to 5 nm) with narrow size distribution were used to investigate antimicrobial activity toward representative microorganisms of public concern (Escherichia ...
Suitability of TiO2 nanoparticles and prolate nanospheroids for laser desorption/ionization mass spectrometric characterization of bipyridine-containing complexes
(Elsevier Science Bv, Amsterdam, 2015)
Nanostructured materials as substrates for surface-assisted laser desorption and ionization time-of-flight mass spectrometry have two main advantages such as small number of signals in the low mass range and salt tolerance. ...
The implementation of image analysis for the visualization of adhesion assessment of a composite film
(Elsevier Science Bv, Amsterdam, 2018)
The objective of this study is to investigate quantitative assessment of the adhesion behavior of composite films onto a metallic surface. The composite films had UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA ...
Structural and optical characterization of hemimorphite with flower-like morphology synthesized by a novel low-temperature method
(Materials Letters, 2012)
We report on novel, low temperature synthesis of well crystallized hemimorphite zinc silicate Zn4Si2O7(OH)(2)(H2O) (ZSO) with flower-like morphology, via one-pot method that includes the assistance of a non-ionic block ...
Thermal shock behavior of alumina based refractories: fracture resistance parameters and water quench test
(Elsevier, Amsterdam, 1999)
The prediction of refractories thermal shock behavior can be estimated on two basis: heat transfer conditions and/or fracture mechanics concept. Materials considered in our analysis were alumina based refractories with ...
Influence of different iron powders on the friction properties of sintered friction materials based on iron
(Elsevier Science B.V., 2000)
The possibility of using iron powders of different morphological, chemical and physical properties as the bases of the metal matrix of the friction layer in sintered friction materials for dry friction under severe braking ...
Chitosan-triclosan films for potential use as bio-antimicrobial bags in healthcare sector
(Elsevier, Amsterdam, 2017)
In this work, antimicrobial bioinspired films made from chitosan incorporated with triclosan were investigated. The tensile strenght of these films were in the range of 33 and 39 MPa, which presented satisfied mechanical ...