Pretraživanje
Prikaz rezultata 11-20 od 502
Silver incorporation on viscose and cotton fibers after air, nitrogen and oxygen DBD plasma pretreatment
(Springer, Dordrecht, 2013)
Dielectric barrier discharge (DBD) pretreatments in air, nitrogen and oxygen plasma of viscose and cotton fabrics with subsequent immobilization of silver were studied. Surface activation of treated fibers was evaluated ...
Bioactive glass-apatite composite coating for titanium implant synthesized by electrophoretic deposition
(Elsevier Sci Ltd, Oxford, 2007)
Titanium and titanium alloys are widely used as materials for implants, because of their mechanical properties and nontoxic behaviour, but unfortunately, are bioinert. In order to solve this problem, the metal implant could ...
Principal component analysis of morphological descriptors for monitoring surface defects induced by thermal shock
(Journal of the European Ceramic Society, 2021)
Pattern recognition techniques are applied to various morphological descriptors to monitor the formation and propagation of surface defects of materials subjected to thermal shock. A low-cement high-alumina castable was ...
Spray drying of Gentiana asclepiadea L. root extract: Successful encapsulation into powders with preserved stability of bioactive compounds
(Industrial Crops and Products, 2021)
Willow gentian as a source of bitter compounds is traditionally used for digestive disorders. Gentiana root extract was spray dried using five different carriers (maltodextrin, whey protein, pectin, starch, gelatine) at ...
Electrochemical testing of noble metal dental alloys: The influence of their chemical composition on the corrosion resistance
(Corrosion Science, 2021)
Platinum and nine commercial dental alloys with the contents of noble metals ranging from 27 wt.% to 97.6 wt. % were investigated by the procedure described in the Standard ISO 10271:2009, Electrochemical testing was ...
Re-refining of waste mineral insulating oil by extraction with N-methyl-2-pyrrolidone
(Elsevier Science Bv, Amsterdam, 2006)
Extraction with N-methyl-2-pyrrolidone (NMP) via the three-stage mixer-settler operation was studied as possible process for re-refining of waste mineral insulating oil. The following extraction process parameters were ...
O2 reduction on on ink-type rotating disk electrode using Pt supported on high-area carbons
(Electrochemical Soc Inc, Pennington, 1998)
The kinetics of O2 reduction has been examined on an ink-type electrode made with Pt supported on high-area carbon. Electrocatalysls with 5-40 mass % of Pt on Black Pearls, Vulcan XC-72, and Shawinigan acetylene black ...
Dynamic cell seeding of polymer scaffolds for cartilage tissue engineering
(Wiley, Hoboken, 1998)
Cell seeding of three-dimensional polymer scaffolds is the first step of the cultivation of engineered tissues in bioreactors. Seeding requirements of large scaffolds to make implants for potential clinical use include: ...
Oxygen reduction on a duplex stainless steel
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
O-2 reduction on duplex stainless steel was investigated in neutral and alkaline solutions with and without the presence of chloride ions. All polarization curves showed hysteresis with higher reaction rate in positive ...
Glycosaminoglycan deposition in engineered cartilage: Experiments and mathematical model
(Wiley-Blackwell, Malden, 2000)
Functional cartilaginous constructs for scientific research and eventual tissue repair were cultivated in bioreactors starting from chondrocytes immobilized on polymeric scaffolds. The scaffolds gradually degraded as the ...