Претраживање
Приказ резултата 31-40 од 51
Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
(International Institute for the Science of Sintering (IISS), 2022)
In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were ...
Effects of poly(vinyl alcohol) blending with Ag/alginate solutions to form nanocomposite fibres for potential use as antibacterial wound dressings
(Royal Society Publishing, 2022)
In this work, nanocomposite fibres and microfibres based on alginate and poly(vinyl alcohol) (PVA) with silver nanoparticles (AgNPs) were produced and characterized for potential application as antibacterial wound dressings. ...
Analysis of inhibitory properties of Ce-citrate as a green corrosion inhibitor of low alloy steel in neutral chloride solution
(John Wiley and Sons Inc, 2022)
The new environmentally friendly corrosion inhibitor Ce-citrate was analyzed in 0.05 M NaCl solution on the AISI 4130 steel. For comparison, corrosion inhibitor Ce-chloride is tested in the same concentration as Ce-citrate ...
INSIGHT INTO SORPTION AND ANTIOXIDANT PROPERTIES OF ANTIBACTERIAL WOUND DRESSINGS COMPOSED OF VISCOSE FABRICS FUNCTIONALIZED WITH CHITOSAN AND CHITOSAN-BASED NANOPARTICLES
(Publishing House of the Romanian Academy, 2022)
Wound dressings designed with simultaneously adequate antibacterial, sorption, and antioxidant properties enable proper wound healing. Since the antibacterial properties have already been proven in our previous studies, ...
TiO2 nanotubes film/FTO glass interface: Thermal treatment effects
(ETRAN, 2022)
Pure Ti films deposited by radio-frequency magnetron sputtering on FTO glass were anodized to fabricate TiO2 nanotubes (NTs) arrays. The TiO2 NTs/FTO samples were sintered at 450, 550 and 630°C, in ambient air. The thermal ...
Self-healing capability of novel eco-epoxy adhesives based on the modified tannic acid on Al adherends tested in a single lap joint
(Elsevier Ltd., 2022)
The aim of this paper is to study the self-healing capability of fractured Al joints bonded with novel eco-epoxide adhesives synthesized from a bio-renewable raw material (tannic acid – TA). Two synthesized eco-epoxy ...
Oxidized jute as a valuable adsorbent for Congo Red from an aqueous solution
(SAGE Publications Ltd., 2022)
The raw jute fabric was oxidized with 0.2% or 0.4% NaIO4 for 60 or 120 min to obtain valuable adsorbents for the textile dye Congo Red (CR). Batch adsorption experiments were carried out as a function of solution pH, contact ...
Adsorption of Metformin on Activated Carbon Produced from the Water Hyacinth Biowaste Using H3PO4 as a Chemical Activator
(MDPI, 2022)
Water hyacinth biomass was used for the synthesis of activated carbons in the process of chemical activation with H3PO4, followed by controlled carbonization. The study investigates the effect of various impregnation weight ...
Analysis of the Mechanism of Acid Mine Drainage Neutralization Using Fly Ash as an Alternative Material: A Case Study of the Extremely Acidic Lake Robule in Eastern Serbia
(MDPI, 2022)
Acid mine drainage (AMD) is a waste from mining sites, usually acidic, with high concentrations of sulfates and heavy metal ions. This study investigates the AMD neutralization process using fly ash (FA) as an alternative ...
Statistical methods for designing a Geiger–Muller counter suitable for an early warning system
(Elsevier B.V., 2022)
The paper discusses statistical methods that can be applied when constructing the Geiger–Muller counters to obtain the same response to radiation, regardless of their dimensions. This issue is relevant for the improvement ...