Претраживање
Приказ резултата 5381-5390 од 5429
Utilization of the integrated process of supercritical extraction and impregnation for incorporation of helichrysum italicum extract into corn starch xerogel
(Savez hemijskih inženjera, Beograd, 2018)
Supercritical CO2 extraction of Helichrysum italicum and impregnation of starch xerogels with the extract by using an integrated scCO(2) extraction and impregnation process were performed at 350 bar and 40 degrees C in ...
Production of lactic acid on liquid distillery stillage / Proizvodnja mlečne kiseline na tečnoj destilerijskoj džibri
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2011)
Bioethanol produced by fermentation of biomass is one of the most important renewable and ecologically friendly energy resources today. After bioethanol distillation a considerable amount of liquid stillage remains (1 hl ...
Characterization of NiAl layers deposited by atmospheric plasma spray (APS) / Karakterizacija NiAl slojeva deponovanih atmosferskim plazma sprejom (APS)
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
In this paper analyzed were the mechanical properties and microstructure of the Ni30Al coating layers deposited using atmospheric plasma spray (APS). For deposition of the coating applied was a composite Ni30wt.% Al powder, ...
The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique
(Materials Research Bulletin, 2016)
In this work, nickel (Ni) thin films were deposited by electron beam evaporation of Ni using Glancing Angle Deposition technique onto the glass substrate with the thickness varied from 25 nm to 150 nm. Characterization of ...
Specific characteristics of coating glazes based on basalt
(Elsevier Ltd., 2012)
Investigations in this paper has been carried out in order to define the correlation between specific characteristics of coating glazes based on basalt, fired faience and appearance and the quality of the ceramic product ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Sn-doped TiO2 nanotubular thin film for photocatalytic degradation of methyl orange dye
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
We fabricated Sn-doped TiO2 nanotubular film via annealing of anodized TiO2 nanotubes grown on F-SnO2 (FTO) glass. Annealing was carried out at 500 degrees C in ambient air. Anatase crystal structure was achieved with no ...
Uticaj inkorporiranog ugljenika na termomehanička svojstva viskoznih vlakana i korda / Influence of incorporate carbon on thermo-mechanical properties of viscose fibres and cord
(Loznica : Viskoza, 1997)
Viskozna vlakna sa inkorporiranim ugljenikom imaju specifična svojstva i namenu. U procesu zagrevanja viskoznih vlakana i korda u prisustvu kiseonika, usled promene kretanja strukturnih elemenata i hemijskih promena, dolazi ...
Analysis of mechanical and structural properties of micro alloyed steel welded joints depending on quality of cored wire
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
The aim of this study was to master new quality cored wires made of steel strips and the cores filled with metal powders and low molecular hydrophobic compounds. For experimental research, the specimens were made of micro ...
Selection of Lactobacillus strains for improvement of antioxidant activity of different soy, whey and milk protein substrates
(Journal of Hygienic Engineering and Design, 2016)
Due to the health benefits and potential food preservative applications, natural antioxidants were recently attracted great attention of many food manufacturers which tend to produce healthy foods. The special challenge ...