Pretraživanje
Prikaz rezultata 51-60 od 67
Savremeni čelici - dvojnikovanjem izazvana plastičnost
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
A significant increase in the research activity dedicated to high manganese TWIP steels has occurred during the past few years, motivated by the breakthrough combination of strength and ductility possessed by these alloys. ...
The influence of thin benzoate-doped polyaniline coatings on corrosion protection of mild steel in different environments
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2013)
The corrosion process of mild steel in the presence of benzoate-doped polyaniline coatings exposed to 3% NaCl has been investigated. This system was also tested for cathodic protection and it has proven more efficient ...
The Corrosion Behavior of an Ag43Cu37Zn20 Alloy in the Natural Seawaters
(Japan Inst Metals, Sendai, 2015)
We investigated the effects of natural seawater on the corrosion of an Ag43Cu37Zn20 alloy. The alloy was a commercial brazing filler alloy of composition (BS1845:1984 Ag5) and belongs to the class of Cd-free silver brazing ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin ...
The disbonding of powder polyester coating on steel pretreated by zinc-phosphate and iron-phosphate coatings
(Wydawnictwo SIGMA - N O T Sp. z o.o, 2013)
The influence of different types of conversion phosphate coatings on the corrosion stability of top powder polyester coating on steel was investigated. The morphology of phosphate coatings was investigated using scanning ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Srpsko hemijsko društvo, Beograd, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2023)
Although the same quality of various metals from the recycling process is considered for granted, obtaining aluminum of high purity and aluminum alloys with identical properties as from production from pure raw materials ...
Economizer water-wall damages initiated by feedwater impurities
(Savez hemijskih inženjera, Beograd, 2014)
The main causes of efficiency loss in thermal power plants are boiler tube failures that diminish unit reliability and availability, and raise the cost of the electric energy. For that reason, the regular examination of ...
Laser cleaning of textile artifacts with metal threads: Process parameter optimization / Lasersko čišćenje tekstilnih eksponata sa korodiranim metalnim nitima - optimzacije parametara procesa
(Military Technical Institute, Belgrade, 2014)
This paper presents the results of the laser cleaning effects on textile samples with corroded metallic threads. In many museum collections, there are textile exhibits like uniforms, national costumes, flags and home ...
Numerical simulation of fatigue crack growth in Ti-Al6-V4 hip implants under different exploitation conditions
(Elsevier B.V., 2023)
One of the most important aspects of materials typically used in biomedical engineering is their resistance to various unfavourable exploitation conditions, which greatly impact their work life. In terms of extreme conditions, ...