Претраживање
Приказ резултата 61-70 од 3271
Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents
(Elsevier Science Bv, Amsterdam, 2017)
The magnetic nanocomposites (MNCs), used as adsorbents for Cd2+ ions, were prepared by a co-precipitation method using both the untreated natural (SEP) and the partially acid-activated (ASEP) sepiolites as supports for ...
Electrical Conductivity of Lignocellulose Composites Loaded with Electrodeposited Copper Powders. Part II. Influence of Particle Size on Percolation Threshold
(Esg, Belgrade, 2012)
This article is concerned with synthesis and characterization of electroconductive composite materials prepared by the compression molding of mixtures of lignocellulose and electrochemically deposited copper powder under ...
Characterization of New Structure for Silicon Carbide X-Ray Detector by Method Monte Carlo
(Polish Acad Sciences Inst Physics, Warsaw, 2011)
This work presents a characterization of radiation absorption properties of silicon carbide (SiC) as semiconductor for the realization of detectors for X-rays. SiC detectors can potentially reach superior performance with ...
Kinetics of sunflower and used vegetable oil methanolysis catalyzed by CaO·ZnO
(Elsevier Sci Ltd, Oxford, 2013)
The kinetics of heterogeneous methanolysis of sunflower oil and used vegetable oil were studied at different temperatures, ranging from 60 to 96 degrees C using CaO center dot ZnO as catalyst (2 wt% on the basis of oil) ...
Influence of hemicelluloses and lignin content on structure and sorption properties of flax fibers (Linum usitatissimum L.)
(Springer, Dordrecht, 2018)
In this work, alkali and oxidative treatments were employed to obtain flax fibers with different content of hemicelluloses and lignin, in order to study the influence of chemical composition on structure and sorption ...
Hydrometallurgical process for extraction of metals from electronic waste, part II: Development of the processes for the recovery of copper from printed circuit boards (PCB)
(Savez inženjera metalurgije Srbije, Beograd, 2011)
Rapid technological development induces increase of generation of used electric and electronic equipment waste, causing a serious threat to the environment. Waste printed circuit boards (WPCBs), as the main component of ...
Investigation of the influential values about the use of the lead electrochemical system / Istraživanja uticajnih veličina na iskorišćenja olovnog elektrohemijskog sistema
(Društvo za sunčevu energiju "Srbija solar", Zrenjanin, 2010)
For the purpose of making a lead battery of the standard quality, characteristics of the exploitation depending on influential values, were tested: currents, temperatures and containing level of the antimony in electrode ...
Evaluation of alginate hydrogels under in vivo-like bioreactor conditions for cartilage tissue engineering
(Springer, Dordrecht, 2010)
Alginate hydrogels in forms of discs and packed beds of microbeads (similar to 800 mu m) were tested in a novel bioreactor at 10% strain using two regimes: at a loading rate of 337.5 mu m/s and at sequential increments of ...
Iron-Modified Sepiolite for Ni2+ Sorption from Aqueous Solution: An Equilibrium, Kinetic, and Thermodynamic Study
(Amer Chemical Soc, Washington, 2010)
Sepiolite was used for the synthesis of the sepiolite-iron oxide system to obtain a sorbent suitable for the removal of Ni2+ from aqueous solution. The modified material, Fe-sepiolite, was characterized by X-ray diffraction ...
Sorption of Cu2+ and Co2+ from aqueous solutions onto sepiolite: An equilibrium, kinetic and thermodynamic study / Sorpcija jona bakra i kobalta iz vodenih rastvora na sepiolitu, ispitivanje ravnoteže, kinetike i termodinamike sorpcije
(Serbian Chemical Society, Belgrade, 2011)
The efficiency of natural sepiolite for the removal of Cu2+ and Co2+ from aqueous solution was determined using the batch method. The sorption experiments were performed as a function of the initial metal concentration, ...