Претраживање
Приказ резултата 41-50 од 56
Nanotubular oxide layers formed on the ti-based implants surfaces-application and possible damages: a review
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Implant surface properties define the interaction of the implant with the surrounding tissue. To obtained advanced biological, mechanical and physical properties, metallic implants are often exposed to different kinds of ...
Optimizing the thermal gradient and the pulling speed in a thermoplastic pultrusion process of pet/e glass fibers using finite element method
(Savez inženjera metalurgije Srbije, Beograd, 2018)
A thermoplastic pultrusion process was examined using commercial fiber roving of PET/E glass, to determine the optimum pulling speed and optimal zonal temperatures. Finite element analysis predicted heat transfer through ...
Characterisation of the nanotubular oxide layer formed on the ultrafine-grained titanium
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Commercially pure titanium (cpTi) and titanium alloys are metallic implant materials usually used in dentistry and orthopaedics. In order to improve implant properties, Ti-based materials may be surface modified by different ...
Sanacija čelicne konstrukcije rešetkastog nosača autodizalice Pinguely TL969
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, 2012)
Sanacija čelične konstrukcije strele samohodne autodizalice TADAHO TL 200 II/K Repair of steel construction on truck-mounted crane TADAHO TL 200 II/K
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2012)
INTERGRANULAR CORROSION OF WELDED JOINTS. FORMING CONDITIONS AND PROCEDURES FOR PREVENTION
(INTEGRITET I VEK KONSTRUKCIJA, 2013)
The paper describes structural changes in the welded joints, leading to the emergence of intergranular corrosion (IGC) during exploitation. The occurrence of intergranular corrosion in welded joints of austenitic, ferritic ...
Immobilization of Aspergillus Niger cellulase onto Lifetech TM carriers and its application in the hydrolysis of sunflower seed meal lignocellulosic fraction / Imobilizacija Aspergillus Niger celulaze na Lifetech TM nosače i primena u reakciji hidrolize lignocelulozne frakcije suncokretove sačme
(Institute for Food Technology, Novi Sad, 2019)
Cellulases are enzymes which catalyse cellulose hydrolysis and are widely used in various industry branches. Lately, their application in treatment of different agroindustrial waste materials which could serve for fuel ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Prednosti zavarivanja trenjem sa mešanjem u odnosu na elektrolučno zavarivanje - zaštita zdravlja i životne sredine i bezbednost na radu / Advantages of friction stir welding over arc welding with respect to health and environmental protection and work safety
(Society for Structural Integrity and Life (DIVK), 2015)
U savremenoj industrijskoj proizvodnji, svaki proizvodni proces treba da bude ispitan u pogledu uticaja na životnu sredinu. Za svaku kompaniju koja investira u novi proces je od značaja pažljivo razmatranje HSE (Health, ...
Selection of lactic acid bacteria strain for simultaneous production of α- and β-galactosidases / Izbor mlečnokiselinske bakterije za istovremenu proizvodnju α- i β-galaktozidaza
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Galactosidases are group of enzymes gaining increasing attention in recent times due to the fact they catalyse hydrolysis of galatose-containing oligosaccharide, which reduce digestibility of various food and feed products. ...