Search
Now showing items 991-996 of 996
The effect of CaO and MgO addition and cooling rate on stability of slag obtained after jarosite and neutral leaching residue treatment in the Waelz process
(Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw, 2018)
Jarosite and neutral leaching residue (NLR) are the greatest environmental problems of hydrometallurgical zinc production due to their high quantity and hazardous content. Pyrometallurgical processes, such as the Waelz ...
Long-term and low-temperature annealing of as-continuous drive friction welded and post-weld heat treated Al/Cu bimetal joints
(Kiev, Ukraine, 2017)
In general, continuous drive friction welding (CDFW) of two metals
may produce three typical regions from a weld interface towards an unaf-
fected base metal: (i) fully deformed or dynamically recrystallized (DRX) ...
The effects of aging on the precipitation of the W-rich phase in the matrix of the 92.5W-5Ni-2,5Fe powder metallurgy heavy alloys
(Association of Metallurgical Engineers of Serbia (AMES), Beograd, 2013)
The precipitation behavior of W-rich phase on the specific matrix locations of
Co-free and Co-containing 92.5W-5Ni-2.5Fe heavy alloys is investigated during
aging of the as-quenched samples. The aging treatment is ...
Antioksidativna aktivnost etanolnih ekstrakata Thymus serpyllum
(Faculty of Technology, Zvornik, 2015)
Wild Thyme (Thymus serpyllum, Lamiaceae) is a subshrub from the Lamiaceae family, with
plants that are rich in essential oils and antioxidative polyphenolic substances. Reducing
potential of phenolic compounds gives them ...
Origin of the Intrinsic Coercivity Field Variations and Magnetic Study of ε-Fe2O3
(Russian Journal of Physical Chemistry A, 2019)
Origin of the intrinsic coercivity field variations observed by hysteretic measurements established by Nikolic et al. was investigated in detail by ZFC/FC measurements. In this study, magnetic behavior of the samples is ...
Characterization of the Ag43Cu37Zn20 alloy surface after potentiostatic polarization using LDI-TOF mass spectrometry
(Walter de Gruyter Gmbh, 2017)
This work is the first to demonstrate the possibilities of direct analysis of the corrosion film formed on Ag43Cu37Zn20 alloy using laser desorption/ionization (LDI) on a commercial matrix-assisted LDI time of flight mass ...