Претраживање
Приказ резултата 681-690 од 736
Exploitation properties of ni-pd/al2o3 catalyst supported on ceramic foam
(Savez inženjera metalurgije Srbije, Beograd, 2015)
The goal of this research was to examine exploitation properties of Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam in the dry methane reforming. The catalyst was prepared by using aerosol method. Chloride precursors ...
Removal of Pb2+ from aqueous solution by P(HEA/IA) hydrogels
(Savez hemijskih inženjera, Beograd, 2016)
A series of poly(2-hydroxyethyl acrylate-co-itaconic acid), P(HEA/IA), hydrogels with different HEA/IA ratio, were synthesized using free radical crosslinking/copolymerization and investigated as sorbents for Pb2+ from ...
Cleaner production aspects of tablet coating process in pharmaceutical industry: problem of VOCs emission
(Elsevier Sci Ltd, Oxford, 2013)
The aim of the article is to present a case study related to implementation of cleaner production (CP) process with the concept of minimizing emissions versus the end of pipe (EOP) approach within pharmaceutical industry. ...
Study on the pyrolysis products of two different hardwood lignins in the presence of NiO contained-zeolites
(Elsevier Ltd, 2017)
Several NiO contained-zeolites (NiO/H-ZSM-5, NiO/H-BETA and NiO/H-Y) prepared by a mechanochemical dry milling (MCDM) were tested in the pyrolysis of two hardwood lignins: Eucalyptus (EUC) and a mixture of birch and aspen ...
Synthesis of pure and La-doped anatase nanopowders by sol-gel and hydrothermal methods and their efficiency in photocatalytic degradation of alprazolam
(Elsevier Ltd., 2014)
Pure and La3+ doped titanium dioxide (TiO2) nanopowders were obtained by sol gel and hydrothermal methods. A precursor was titanium tetrachloride and concentrations of dopants were 0.5 and 1.0 mol%. Procedures of both ...
A rapid test to measure adhesion between optical fibers and ethylene-vinyl acetate copolymer (EVA)
(Elsevier Sci Ltd, Oxford, 2016)
Optical fibers are transported on a drum and on some occasions it is essential to fix them and to keep them fixed to the drum. Adhesives are used in such situations to obtain the best and durable fixation. This research ...
Graphene Based Composite Hydrogel for Biomedical Applications
(Croatian Chemical Soc, Zagreb, 2017)
In this work, composite hydrogel consisting of poly(vinyl alcohol), graphene and silver nanoparticles, (Ag/PVA/Gr), was prepared by the immobilization of silver nanoparticles (AgNPs) in PVA/Gr hydrogel matrix in two steps. ...
Anodization of Ti-based materials for biomedical applications: A review
(Association of Metallurgical Engineers of Serbia, 2016)
Commercially pure titanium (cpTi) and titanium alloys are the most commonly used metallic biomaterials. Biomedical requirements for the successful usage of metallic implant materials include their high mechanical strength, ...
Analysis of compressor valves bolts failure
(The Bulletin of the National R&D Institute for Welding and Material Testing - ISIM Timişoara, Romania, 2013)
Farmaceutski preparati i opojne droge kao kontaminirajuće supstance površinskih i otpadnih voda / PHARMACEUTICAL PREPARATIONS AND ILLICIT DRUGS AS CONTAMINATING SUBSTANCES OF SURFACE AND WASTEWATER
(Zastita Materijala, 2018)
Prisustvo farmaceutskih preparata i opojnih droga u otpadnim, površinskim i podzemnim vodama
predstavlja ozbiljan problem po zdravlje ljudi. Razlog za to je činjenica da ova jedinjenja poseduju
biološku aktivnost, lako ...