Претраживање
Приказ резултата 1-10 од 23
Field performance of micropropagated rubus species
(Acta Scientiarum Polonorum, Hortorum Cultus, 2016)
The objective of this study was to test yield and fruit quality of the red raspberry 'Meeker' and the blackberry 'Cacanska Bestrna' propagated using the standard method (ST) and in vitro, by tissue culture (TC). The monitored ...
Lossless Compression of Vibration Signals on an Embedded Device Using a TDE Based Predictor
(Kaunas Univ Technology, Kaunas, 2016)
A lossless compression scheme for the data acquired from three-axial microelectromechanical (MEMS) accelerometer is presented. Time delay estimation (TDE) was applied in conjunction with differential pulse code modulation ...
Microhardness of decorative gold coatings obtained from gold complex based on mercaptotriazole: Comparison with cyanide
(Carl Hanser Verlag, Munich, 2016)
The aim of this work was to investigate the effects of current density, temperature, pH and concentration of ethyl-hexilsulfonate additive on the microhardness of electrochemically deposited gold decorative coatings obtained ...
Effects of friction-welding parameters on the morphological properties of an al/cu bimetallic joint
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
The objective of this research is to consider the effects of certain parameters of the friction-welding process on the morphology of an aluminum/copper joint. The effect of the following parameters was monitored: the ...
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...
Multi-criteria analysis of synthesis methods for ni-based catalysts
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
Catalysts based on the Ni/Al2O3 system are used in a variety of catalytic processes. Catalysts are commonly synthesized through thermochemical routes (impregnation, precipitation, coprecipitation and others). The authors ...
Influence of material velocity on heat generation during linear welding stage of friction stir welding
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material ...
Isopiestic Determination of the Osmotic and Activity Coefficients of the {yNa(2)HPO(4) + (1-y)K2HPO4}(aq) System at T=298.15 K
(Springer/Plenum Publishers, New York, 2016)
Isopiestic measurements have been made for aqueous mixtures of Na2HPO4 and K2HPO4 at T = (298.15 +/- 0.01) K, at Na2HPO4 ionic strength fractions y = (0.2023, 0.4060, 0.6027, 0.8007, and 1), using KCl(aq) as the reference ...
Immobilization of maltase from Saccharomyces cerevisiae on thiosulfonate supports
(Srpsko hemijsko društvo, Beograd, 2016)
In this study, two commercial supports (Eupergit (R) C and Purolite (R) A109) were chemically modified in order to introduce thiosulfonate groups, which could subsequently exclusively react with the cysteine residues on ...
Quantitative Structure-Retention Relationships Modeling and Multivariate Data Analysis of Lipophilicity Data of New Spirohydantoin Derivatives
(Akademiai Kiado Zrt, Budapest, 2016)
Modeling properties of newly synthesized compounds is important for both understanding their activity and predicting their interactions. This paper describes the evaluation of the lipophilicity of the newly synthesized ...