Претраживање
Приказ резултата 11-20 од 23
Immobilization of horseradish peroxidase onto kaolin by glutaraldehyde method and its application in decolorization of anthraquinone dye
(Savez hemijskih inženjera, Beograd, 2016)
The problem of environmental pollution becomes more worrisome day by day, primarily due to the large amounts of wastewater contaminated with various harmful organic compounds, discharged untreated or partially clean into ...
Immobilization of maltase from Saccharomyces cerevisiae on thiosulfonate supports
(Srpsko hemijsko društvo, Beograd, 2016)
In this study, two commercial supports (Eupergit (R) C and Purolite (R) A109) were chemically modified in order to introduce thiosulfonate groups, which could subsequently exclusively react with the cysteine residues on ...
Continuous improvement concepts as a link between quality assurance and implementation of cleaner production - case study in the generic pharmaceutical industry
(Savez hemijskih inženjera, Beograd, 2016)
The subject and the research objective presented in this article is establishing of the relationship between quality assurance and implementation of cleaner production in the generic pharmaceutical industry through the ...
Effects of friction-welding parameters on the morphological properties of an al/cu bimetallic joint
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
The objective of this research is to consider the effects of certain parameters of the friction-welding process on the morphology of an aluminum/copper joint. The effect of the following parameters was monitored: the ...
Lossless Compression of Vibration Signals on an Embedded Device Using a TDE Based Predictor
(Kaunas Univ Technology, Kaunas, 2016)
A lossless compression scheme for the data acquired from three-axial microelectromechanical (MEMS) accelerometer is presented. Time delay estimation (TDE) was applied in conjunction with differential pulse code modulation ...
Microhardness of decorative gold coatings obtained from gold complex based on mercaptotriazole: Comparison with cyanide
(Carl Hanser Verlag, Munich, 2016)
The aim of this work was to investigate the effects of current density, temperature, pH and concentration of ethyl-hexilsulfonate additive on the microhardness of electrochemically deposited gold decorative coatings obtained ...
Opportunities, perspectives and limits in lactic acid production from waste and industrial by-products
(Savez hemijskih inženjera, Beograd, 2016)
In line with the goals of sustainable development and environmental protection today great attention is directed towards new technologies for waste and industrial by-products utilization. Waste products represent potentially ...
Multi-criteria analysis of synthesis methods for ni-based catalysts
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
Catalysts based on the Ni/Al2O3 system are used in a variety of catalytic processes. Catalysts are commonly synthesized through thermochemical routes (impregnation, precipitation, coprecipitation and others). The authors ...
Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium
(Savez hemijskih inženjera, Beograd, 2016)
The aim of this study was comparative analysis of catalysts with 5 and 20 wt.% Ni loading, with and without Pd additive, and it included: determination of reduction degrees, investigation on microstructure by scanning ...
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...