Претраживање
Приказ резултата 31-40 од 41
Multi-criteria analysis of synthesis methods for ni-based catalysts
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
Catalysts based on the Ni/Al2O3 system are used in a variety of catalytic processes. Catalysts are commonly synthesized through thermochemical routes (impregnation, precipitation, coprecipitation and others). The authors ...
Hydrometallurgical recovery of tin and lead from waste printed circuit boards (wpcbs): limitations and opportunities
(Croatian Metallurgical Soc, Zagreb, 2016)
In this paper, possibility for selective Pb and Sn recovery, using three different solutions of NaOH, HCl and HNO3, from WPCBs containing low concentrations of Pb and Sn is presented. According to obtained results, over ...
Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium
(Savez hemijskih inženjera, Beograd, 2016)
The aim of this study was comparative analysis of catalysts with 5 and 20 wt.% Ni loading, with and without Pd additive, and it included: determination of reduction degrees, investigation on microstructure by scanning ...
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...
Influence of material velocity on heat generation during linear welding stage of friction stir welding
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material ...
Removal of Pb2+ from aqueous solution by P(HEA/IA) hydrogels
(Savez hemijskih inženjera, Beograd, 2016)
A series of poly(2-hydroxyethyl acrylate-co-itaconic acid), P(HEA/IA), hydrogels with different HEA/IA ratio, were synthesized using free radical crosslinking/copolymerization and investigated as sorbents for Pb2+ from ...
Quality of fermented whey beverage with milk
(Savez hemijskih inženjera, Beograd, 2016)
One of the most economical ways of whey processing is the production of beverages, which represents a single process that exploits all the potential of whey as a raw material. Functional and sensory characteristics of ...
Anodization of Ti-based materials for biomedical applications: A review
(Association of Metallurgical Engineers of Serbia, 2016)
Commercially pure titanium (cpTi) and titanium alloys are the most commonly used metallic biomaterials. Biomedical requirements for the successful usage of metallic implant materials include their high mechanical strength, ...
Selection of lactic acid bacteria strain for simultaneous production of α- and β-galactosidases / Izbor mlečnokiselinske bakterije za istovremenu proizvodnju α- i β-galaktozidaza
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Galactosidases are group of enzymes gaining increasing attention in recent times due to the fact they catalyse hydrolysis of galatose-containing oligosaccharide, which reduce digestibility of various food and feed products. ...
Functional, rheological and sensory properties of probiotic milk chocolate produced in a ball mill
(Royal Soc Chemistry, Cambridge, 2016)
The aim of this study was to investigate the survival of probiotics (Lactobacillus acidophilus NCFM, Lactobacillus rhamnosus HN001 and Bifidobacterium lactis HN019) in milk chocolate masses prepared at temperatures 35 ...