Претраживање
Приказ резултата 1-10 од 579
Optimization and kinetic study of anthraquinone dye removal from colored wastewater using soybean seed as a source of peroxidase
(Macedonian Journal of Chemistry and Chemical Engineering, 2020)
As water contamination emerges as a serious threat to the environment, ventures for cleaner and sustainable solutions are continuously being developed. The present study investigates the ability of crude peroxidase extract ...
Ag+, Cu2+ and Zn2+ doped hydroxyapatite/tricalcium phosphate bioceramics: Influence of doping and sintering technique on mechanical properties
(University of Novi Sad, Faculty of Technology, 2018)
Green hydroxyapatite ceramics were obtained by cold uniaxial and isostatic pressing of hydrothermally synthesized powders, pure hydroxyapatite and hydroxyapatite doped with Ag+, Cu2+ and Zn2+ ions. The ceramics were ...
Nimonic 263 microstructure and surface characterization after laser shock peening
(Croatian Metallurgical Soc, Zagreb, 2015)
The Laser Shock Peening (LSP) is applied to the surface of Nimonic 263 alloy. The changes in microstructure and surface topography are observed and analyzed by Scanning Electron Microscopy (SEM), profilometer and microhardness ...
Structural, Morphological and Electrical Properties of Alumina/YAG Composites as Solid Electrolyte for IT - SOFC
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Alumina/YAG composites (AYX_t) with high relative density (99.2 %TD) were successfully obtained by mixing commercial alumina powder with different volume fractions of yttrium aluminium garnet (Y3Al5O12-YAG; 7, 14, 21 and ...
Visible light absorption of TiO2 nanoparticles surface-modified with vitamin B-6: A comparative experimental and DFT study
(Srpsko hemijsko društvo, Beograd, 2018)
Surface modification of titanium dioxide nanoparticles (TiO2 NPs) with the biologically active molecule pyridoxine hydrochloride (vitamin B-6) was found to alter the optical properties. Microstructural characterization ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...
Structural properties of carbon microspheres obtained by hydrothermal treatment of fructose / Strukturne osobine mikrosfera ugljenika dobijenih hidrotermičkim tretmanom fruktoze
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
A carbon-rich solid product has been synthesized by hydrothermal treatment from fructose with HNO3 at temperature of 140°C. The concentration of the precursor was changed in order to investigate how its change influences ...
Modification of natural clinoptilolite and ZSM-5 with different oxides and a study of the obtained products in lignin pyrolysis
(Srpsko hemijsko društvo, Beograd, 2015)
In this work, different metal oxides (MO) supported on two types of zeolites: 1) natural clinoptilolite (NZ) and 2) synthetic zeolite, ZSM-5 were prepared and tested as catalysts in the fast pyrolysis of hardwood lignin. ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
Thermal cycling behaviour of plasma sprayed nicr-al-co-y2o3 bond coat in thermal barrier coating system
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2019)
The aim of this study was to investigate the thermal cycling behaviour of NiCr-Al-Co-Y2O3 bond coating in thermal barrier coating (TBC) system with ZrO2-MgO as a top coating. The coatings were deposited by atmospheric ...