Претраживање
Приказ резултата 331-340 од 348
Optimizing the content of nickel in flux-cored wire intended for welding micro-alloyed steels / Optimizacija sadržaja nikla u punjenoj žici namenjenoj za zavarivanje mikrolegiranih čelika
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
This paper presents the results related to organizing production of flux-cored wire alloyed with Ni and Mo according to standard AWS A5.29 intended for the MAG welding process. On the experimental line for steel strip ...
Quality of fermented whey beverage with milk
(Savez hemijskih inženjera, Beograd, 2016)
One of the most economical ways of whey processing is the production of beverages, which represents a single process that exploits all the potential of whey as a raw material. Functional and sensory characteristics of ...
Graphene Based Composite Hydrogel for Biomedical Applications
(Croatian Chemical Soc, Zagreb, 2017)
In this work, composite hydrogel consisting of poly(vinyl alcohol), graphene and silver nanoparticles, (Ag/PVA/Gr), was prepared by the immobilization of silver nanoparticles (AgNPs) in PVA/Gr hydrogel matrix in two steps. ...
Anodization of Ti-based materials for biomedical applications: A review
(Association of Metallurgical Engineers of Serbia, 2016)
Commercially pure titanium (cpTi) and titanium alloys are the most commonly used metallic biomaterials. Biomedical requirements for the successful usage of metallic implant materials include their high mechanical strength, ...
Mechanical properties and microstructure of the ZrO25CaO/NiCrAl coating system / Mehaničke osobine i mikrostruktura sistema prevlaka ZrO25CaO/NiCrAl
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
ZrO25CaO is a versatile class of material that can be sintered or plasma spray deposited in combination with other materials on the implant substrate. Due to brittleness the organic ceramic hydroxyapatite Ca10(PO4)6(OH)2 ...
Analysis of compressor valves bolts failure
(The Bulletin of the National R&D Institute for Welding and Material Testing - ISIM Timişoara, Romania, 2013)
Selection of lactic acid bacteria strain for simultaneous production of α- and β-galactosidases / Izbor mlečnokiselinske bakterije za istovremenu proizvodnju α- i β-galaktozidaza
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Galactosidases are group of enzymes gaining increasing attention in recent times due to the fact they catalyse hydrolysis of galatose-containing oligosaccharide, which reduce digestibility of various food and feed products. ...
Characterization of plasma spray bioinert coating Al2O328wt.%MgO / Karakterizacija plazma sprej bioinertne prevlake Al2O328tež.%MgO
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
This paper presents the results of testing mechanical and structural characteristics of plasma spray coating Al2O328wt.%MgO. Metal oxide MgO in a complex oxide Al2O328wt.%MgO modifies the properties of Al2O3 ceramics by ...
Change of temperature and vertical force during friction stir welding / Promena temperature i vertikalne sile tokom procesa zavarivanja trenjem mešanjem
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2013)
The aim of this paper is to analyze changes of vertical force and temperature during friction stir welding process of high strength aluminum alloys (2024 T3). FSW process is a complex nonlinear process accompanied by large ...
Farmaceutski preparati i opojne droge kao kontaminirajuće supstance površinskih i otpadnih voda / PHARMACEUTICAL PREPARATIONS AND ILLICIT DRUGS AS CONTAMINATING SUBSTANCES OF SURFACE AND WASTEWATER
(Zastita Materijala, 2018)
Prisustvo farmaceutskih preparata i opojnih droga u otpadnim, površinskim i podzemnim vodama
predstavlja ozbiljan problem po zdravlje ljudi. Razlog za to je činjenica da ova jedinjenja poseduju
biološku aktivnost, lako ...