Pretraživanje
Prikaz rezultata 1-10 od 188
Removal of copper(II) ion from aqueous solution by high-porosity activated carbon
(Water Research Commission, Pretoria, 2013)
The removal of copper(II) ion from aqueous solution by the granular activated carbon, obtained from hazelnut shells (ACHS) (Corylus avellana L. var. lunga istriana), was investigated. The ACHS was prepared from ground dried ...
Thermal resistance testing of standard and protective filtering military garment on the burning napalm mixture / Testiranje termičke otpornosti standardne i filtrirajuće zaštitne vojničke uniforme na goruću napalm smešu
(Association of Chemical Engineers of Serbia, 2013)
Fires are an accompanying manifestation in modern weaponry use and in various accidents in peacetime. The standard military uniform is a primary barrier in protection of a soldier's body from all external influences, ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
Functionalization of thermo-acid activated sepiolite by amine-silane and mercapto-silane for chromium(VI) adsorption from aqueous solutions / Adsorpcija hroma(VI) iz vodenih rastvora na termo-kiselinski aktiviranom sepiolitu funkcionalizovanom amino-silanom i merkapto-silanom
(Association of Chemical Engineers of Serbia, 2013)
Chromium(VI) adsorption from aqueous solutions onto thermo-acid activated sepiolite functionalized with (3-mercaptopropyl)trimethoxy-silane and [3-(2-aminoethylamino)propyl]trimethoxy-silane was investigated. Scanning ...
Development of RuO2/TiO2 titanium anodes and a device for in situ active chlorine generation / Razvoj titanskih RuO2/TiO2 anoda i uređaja za in situ proizvodnju aktivnog hlora
(Association of Chemical Engineers of Serbia, 2013)
Chlorine is used worldwide for water disinfection purposes. However, due to its toxicity the EU has imposed a set of standards that must be applied when transporting and storing chlorine. In Serbia, numerous studies have ...
Controlled production of alginate nanocomposites with incorporated silver nanoparticles aimed for biomedical applications / Kontrolisano dobijanje alginatnih nanokompozita sa inkorporisanim nanočesticama srebra u cilju biomedicinske primene
(Serbian Chemical Society, Belgrade, 2012)
The production of nanocomposite alginate microbeads with electrochemically synthesized silver nanoparticles (AgNPs) based on the electrostatic extrusion technique was investigated with respect to their potentials for ...
A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst / Proučavanje fotokatalitičke degradacije tekstilne boje CI Basic Yellow 28 u vodi koristeći P160 katalizator na bazi TiO2
(Serbian Chemical Society, Belgrade, 2012)
The photocatalytic degradation of the synthetic textile dye CI Basic Yellow 28 (BY28) in water, using a recently synthesized P160 TiO2-based catalyst, under Osram ultra-vitalux® lamp (300 W) light, was studied. The effects ...
Adsorption of azo dyes on polymer materials / Adsorpcija azo boja na polimernim materijalima
(Association of Chemical Engineers of Serbia, 2013)
The use of polymeric adsorbents for the removal of azo dyes from solution has been reviewed. Adsorption techniques are widely used to remove certain classes of pollutants from waters, especially those which are not easily ...
Electrochemical impedance spectroscopy of a silver-doped hydroxyapatite coating in simulated body fluid used as a corrosive agent / Spektroskopija elektrohemijske impedancije prevlake hidroksiapatita dopirane srebrom u simuliranoj telesnoj tečnosti korišćenoj kao korozioni agens
(Serbian Chemical Society, Belgrade, 2012)
Titanium is a key biomedical material due to its good biocompatibility, mechanical properties and corrosion stability, but infections at the implantation site still pose a serious threat. One approach to prevent infection ...
Electrospun Poly(vinylbutyral)/silica Composite Fibres for Impregnation of Aramid Fabrics
(Materiale Plastice, 2014)
The poly (vinyl butyral)/silica (PVB/SiO2) composite fibers were produced by the electrospinning process. The experiments were performed with the PVB solution in concentration of 10 wt.% where ethanol was used as the ...