Претраживање
Приказ резултата 831-840 од 1904
Reducing packaging waste – mechanical characteristics and network parameters of the gelatin-based thin film for cruciferous vegetables packaging
(University of East Sarajevo, Faculty of Technology, 2018)
The role of the materials used for packaging is to protect inner content from external, mostly negative, factors. Besides being safe, and with good mechanical properties, these materials need to align with other consumers’ ...
Influence of Cold Rolling and Annealing on the Mechanical and Corrosion Properties of an AA5182 Al-Mg Alloy
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2023)
In this study we investigated the effect of cold rolling reductions and different annealing conditions, on the mechanical properties and corrosion resistance of an AA5182 type Al-Mg alloy. Material was industrially produced ...
Hydrometallurgical recovery of tin and lead from waste printed circuit boards (wpcbs): limitations and opportunities
(Croatian Metallurgical Soc, Zagreb, 2016)
In this paper, possibility for selective Pb and Sn recovery, using three different solutions of NaOH, HCl and HNO3, from WPCBs containing low concentrations of Pb and Sn is presented. According to obtained results, over ...
KAOLIN AS A SUPPORT FOR THE IMMOBILIZATION OF HORSERADISH PEROXIDASE: APPLICATION IN ANTHRAQUINONIC DYES DECOLORIZATION FROM WASTEWATER
(Zvornik : Tehnološki fakultet, 2015)
The world is facing with global water crisis because around 20 % of untreated or partially
treated wastewater is discharged directly into the environment. The main objective of this paper
was to develop an eco-friendly, ...
Heat generation during plunge stage in friction stir welding
(Vinca Institute of Nuclear Sciences, 2013)
This paper deals with the heat generation in the Al alloy Al2024-T3 plate under different rotating speeds and plunge speeds during the plunge stage of friction stir welding. A 3-D finite element model is developed in the ...
Influence of whey proteins addition on mechanical stability of biopolymer beads with immobilized probiotics / Uticaj dodatka proteina surutke na mehaničku stabilnost biopolimernih nosača sa imobilisanim probioticima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Biopolymer carriers are widely used for immobilization of the bioactive compounds and different type of the cells. The aim of this study was to analyze influence of whey proteins addition on mechanical strength of Ca-alginate ...
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...
Novel approaches in nanoencapsulation of aromas and flavors
(Elsevier, 2016)
In recent years, people’s dietary habits become more oriented toward healthy, safe, and, at the same time, tasty food. The perception of food taste is mostly affected by the addition of flavors and aromas during processing. ...
Influence of the alkali treatment on the sorption and dielectric properties of woven jute fabric
(Springer, 2019)
Woven jute fabric was treated with sodium hydroxide solution of different concentrations at room temperature, for different periods of time. After that, jute fabrics with gradually decreased content of hemicelluloses were ...