Search
Now showing items 1-10 of 348
Structure and photocatalytic properties of sintered TiO2 nanotube arrays
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the ...
Immobilization of peroxidase from fresh horseradish extract for anthraquinone dye decolorization / Imobilizacija peroksidaze iz svežeg ekstrakta rena i primena u dekolorizaciji antrahinonskih boja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthetic dyes are used in all sectors of industry and represent a serious ecological problem. By the presence, anthraquinone dyes are right after the azo dyes. Unlike azo, anthraquinone dyes are considerably harder to ...
Distribution of loads of cycloid speed reducer
(University of Timisoara, Transactions on Mechanics, 2011)
Cycloidal speed reducer belongs to the generation of modern planetary gears. It main features are:
high transmission ratio, compact design, long and reliable working life, high efficiency, possibility of accepting
big ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...
Continuous flow synthesis of some 6-and 1,6-substituted 3-cyano-4-methyl-2-pyridones
(Srpsko hemijsko društvo, Beograd, 2019)
In this study, six 6- and 1,6-substituted-3-cyano-4-methyl-2-pyridones were synthesized in a continuous flow microreactor system. The syntheses were realized at room temperature and the obtained results were compared to ...
Structure and properties of TEMPO-oxidized cotton fibers / Struktura i svojstva TEMPO-oksidisanih vlakana pamuka
(Association of the Chemical Engineers of Serbia, 2012)
In this paper, the influence of the catalytic oxidation using water soluble and stable nitroxyl radical 2,2',6,6'-tetramethylpiperidine-1-oxyl (TEMPO) on the structure and properties of cotton fibers was studied. In ...
Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium
(Savez hemijskih inženjera, Beograd, 2016)
The aim of this study was comparative analysis of catalysts with 5 and 20 wt.% Ni loading, with and without Pd additive, and it included: determination of reduction degrees, investigation on microstructure by scanning ...
Antimicrobial oxidized hemp fibers with incorporated silver particles / Antimikrobna tempo-oksidisana vlakna konoplje sa inkorporisanim česticama srebra
(Serbian Chemical Society, Belgrade, 2012)
In this study, antimicrobial silver-loaded hemp fibers were prepared by selective TEMPO-mediated oxidation, i.e., oxidation with sodium hypochlorite, catalytic amount of sodium bromide and the 2,2,6,6-tetramethylpipe-ridine-1-oxy ...
Picosecond laser shock peening of base Nimonic 263 material and laser welded Nimonic 263 alloy / Mehanička obrada pikosekundnim laserom osnovnog materijala i zavarenih spojeva legure Nimonik 263
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2015)
Laser welding is a welding process with a high energy density and numerous advantages over conventional welding methods (narrow heat affected zone, lower heat input, less distortion, and the like.) Mechanical treatment ...
Salt template zirconia reinforcing particles as possible reinforcement for PMMA matrix composite
(Sage Publications Ltd, London, 2019)
To obtain flakes like zirconia particles at relatively low temperature, the synthesis method for producing zirconia particles on the surface of salt particles that serve as a template is examined. The produced particles ...