Претраживање
Приказ резултата 191-200 од 227
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...
Experimental Investigation of Microstructure and Phase Transitions in Ag-Cu-Zn Brazing Alloys
(Springer, 2018)
Microstructure and phase transitions of selected brazing alloys from the Ag-Cu-Zn ternary system were investigated. Four ternary alloys with silver content in the compositional range from 25 to 60 wt.% were studied using ...
Priprema i karakterizacija lipozoma sa inkapsuliranim bioaktivnim hidrolizatom proteina soje / Production and characterization of liposomes with encapsulated bioactive soy protein hydrolysate
(Savez hemijskih inženjera Srbije, 2020)
Komercijalna primena hidrolizata proteina soje još uvek je ograničena zbog male
bioraspoloživosti peptida, gorkog ukusa, higroskopnosti i reaktivnosti u prehrambenim
proizvodima. Cilj ovog istraživanja jeste inkapsulacija ...
In vitro biocompatibility assessment of Co-Cr-Mo dental cast alloy
(Srpsko hemijsko društvo, Beograd, 2015)
Metallic materials, such as Co-Cr-Mo alloys, are exposed to aggressive conditions in the oral cavity that represents an ideal environment for metallic ion release and biodegradation. The metallic ions released from dental ...
Temperature fields in linear stage of friction stir welding effect of different material properties
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2019)
Friction stir welding is one of the procedures for joining the parts in solid state. Thermo-mechanical simulation of the friction stir welding of high-strength aluminium alloys 2024 T3 and 2024 T351 is considered in this ...
Obezbeđenje kvaliteta podataka o emisijama zagađujućih materija u vazduh iz energetskih postrojenja u Republici Srbiji / Quality assurance of the Serbian national E-PRTR register reported data for large combustion plants
(Association of Chemical Engineers of Serbia, 2012)
U periodu od 2007. do 2009. godine, a radi kontrole i ograničenja emisije iz industrije u
skladu sa Pravilnikom o metodologiji za izradu integralnog katastra zagađivača, za potrebe
Integralnog katastra zagađivača niz ...
Solid state synthesis of extra phase-pure Li4Ti5O12 spinel
(Belgrade : International Institute for the Science of Sintering, 2011)
Extra phase-pure Li4Ti5O12 spinel with particle sizes less than 500 nm was synthesized by solid state reaction of mechanochemicaly activated mixture of nano anatase and Li2CO3 for a very short annealing time, 4 h at 800°C. ...
Liquid transfer properties of textile fabrics as a function of moisture content
(Savez hemijskih inženjera, Beograd, 2020)
Liquid transport in textile fabrics determines thermal comfort during high physical activity of a person when liquid perspiration is produced and needs to be transferred away from the skin to keep the thermal balance. In ...
Kinetic and isotherm studies for the biosorption of nickel ions by jute fabrics
(Journal of the Serbian Chemical Society, 2021)
Raw jute fabric was chemically modified with 1 % NaOH for 30 min, 17.5 % NaOH for 5 min or with 0.7 % NaClO2 for 30 and 60 min to study the influence of changes in the chemical composition of the fabrics and quantity of ...