Претраживање
Приказ резултата 21-30 од 60
Nimonic 263 microstructure and surface characterization after laser shock peening
(Croatian Metallurgical Soc, Zagreb, 2015)
The Laser Shock Peening (LSP) is applied to the surface of Nimonic 263 alloy. The changes in microstructure and surface topography are observed and analyzed by Scanning Electron Microscopy (SEM), profilometer and microhardness ...
Effect of Electrodeposition Current Density on the Microstructure and Magnetic Properties of Nickel-cobalt-molybdenum Alloy Powders
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
Nanostructured nickel-cobalt-molybdenum alloy powders were electrodeposited from an ammonium sulfate bath. The powders mostly consist of an amorphous phase and a very small amount of nanocrystals with an mean size of less ...
Development of the automated software and device for determination of wicking in textiles using open-source tools
(Public Library Science, San Francisco, 2020)
The development of automated software and the device for determination of wicking of textile materials, using open-source ImageJ libraries for image processing, and newly designed additional algorithm for the determination ...
Review on adhesives and surface treatments for structural applications: Recent developments on sustainability and implementation for metal and composite substrates
(MDPI, Basel, 2020)
Using adhesives for connection technology has many benefits. It is cost-efficient, fast, and allows homogeneous stress distribution between the bonded surfaces. This paper gives an overview on the current state of knowledge ...
Thermal, morphological, and mechanical properties of ethyl vanillin immobilized in polyvinyl alcohol by electrospinning process
(Springer, Dordrecht, 2014)
In this study, polyvinyl alcohol (PVA) nanofibers with ethyl vanillin as an active compound were prepared using electrospinning technique. The final products of electrospinning process were in the form of nanofibers films. ...
Investigation of Possibility for Stabilization and Valorization of Electric Arc Furnace Dust and Glass From Electronic Waste
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
This paper presents investigation of possibility for electric arc furnace dust (EAFD) and electronic waste (e-waste) valorization trough stabilization process, in order to achieve concurrent management of these two serious ...
Structural diversities of mangancsc(II) complexes based on benzenedicarboxylate ions and 2,2'-dipyridylamine
(Int Union Crystallography, Chester, 2015)
Differentiation between Pseudomonas and Stenotrophomonas species isolated from fish using molecular and MALDI-TOF method / Diferencijacija Pseudomonas i Stenotrophomonas vrsta izolovanih iz riba primenom molekularnih metoda i MALDI-TOF metode
(Univerzitet u Beogradu - Fakultet veterinarske medicine, Beograd, 2016)
For the purpose of precise antibiotic susceptibility testing it is necessary to clearly distinguish Pseudomonas and Stenotrophomonas genera, considering acquired resistance of Pseudomonas species, as well as the intrinsic ...
Enhanced absorption of TiO2 nanotubes by N-doping and CdS quantum dots sensitization: insight into the structure
(Royal Soc Chemistry, Cambridge, 2018)
Anodization of titanium film sputtered on fluorine doped tin oxide (FTO) glass was performed to obtain highly ordered approximate to 2 m long and approximate to 60 nm wide TiO2 nanotubes. The titania films were annealed ...
Lignin-Degrading Abilities of Novel Autochthonous Fungal Isolates Trametes hirsuta F13 and Stereum gausapatum F28
(Faculty Food Technology Biotechnology, Zagreb, 2018)
The aim of this research is to isolate and identify fungi with high lignin-degrading abilities that are autochthonous to southern Serbian region. Two novel fungal isolates identified as Trametes hirsuta F13 and Stereum ...