Претраживање
Приказ резултата 31-40 од 73
Optimization of the process of calcium-carbonate dispersion stabilization for paper industry needs / Proces dobijanja stabilne disperzije kalcijum-karbonata za potrebe papirne industije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
This paper presents the optimized technological process for obtaining stable calcium carbonate dispersion (CaCO3) in accordance to the standard prescribed in the paper industry. The reason for using CaCO3 in paper production ...
Statistical modeling and optimization of ultrasound-assisted biodiesel production using various experimental designs / Statističko modelovanje i optimizacija proizvodnje biodizela u prisustvu ultrazvuka primenom različitih eksperimentalnih planova
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The present study compares the performances of the regression models developed by the response surface methodology combined with the full factorial, Box-Behnken or face central composite designs applied for the ultrasound-assisted ...
Two-stage fermentation for lactic acid production on distillery stillage / Dvostepena fermentacija za proizvodnju mlečne kiseline na destilerijskoj džibri
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2018)
The aim of this study was to assess utilization of distillery stillage in a two-stage fermentation using Bacillus licheniformis TFUNS and Lactobacillus paracasei NRRL B-4564. In the first stage the stillage was pretreated ...
Impregnation of cellulose acetate films with carvacrol using supercritical carbon ioxide / Impregnacija filmova acetata celuloze karvakrolom pomoću natkritičnog ugljenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Cellulose acetate films were impregnated with carvacrol using supercritical carbon dioxide. The supercritical impregnation process, conducted in a static regime at pressure of 21 MPa and temperature of 50°C, was optimized ...
Examination of the adhesion of polymer composite films based on Bis-GMA/TEGDMA on different metal substrates / Ispitivanje adhezije polimernih kompozitnih filmova na bazi Bis-GMA/TEGDMA na različitim metalnim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The subject of this study is the quantitative adhesion of a UV-curing composite film based on Bis-GMA (Bisphenol A glycidylmethacrylate) / TEGDMA (triethylene glycol dimethacrylate) as a matrix and particles doped with ...
Sorption of textile dyes from textile wastewater by chitosan-based hydrogel / Sorpcija boja za tekstil iz tekstilnih otpadnih voda pomoću hidrogela na bazi hitozana
(Savez inženjera i tehničara Srbije, Beograd, 2018)
With the excessive risks that are present in today's environment, it is of great importance to treat wastewaters before their discharge in water streams. One of the everyday challenges is design of a low-cost and environmentally ...
β-amylase production by a novel strain Paenibacillus chitinolyticus CKS1 using commercial and waste substrates / Proizvodnja β-amilaza pomoću novog bakterijskog soja Paenibacillus chitinolyticus CKS1 na komercijalnim i otpadnim supstratima
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2018)
Amylases are industrially important enzymes which could convert starch to glucose, maltose and oligosaccharides. A bacterial strain designated as Paenibacillus chitinolyticus CKS1which was isolated from the soil of the ...
Synthesis and properties of nano-hydroxyapatite/poly (methacrylic acid) composite hydrogels / Uticaj neutralizacije na svojstva poroznih hidrogelova na bazi hidroksiapatita i poli(metakrilne kiseline) sintetisanih slobodno-radikalskom polimerizacijom
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Goals. The goal of this study was a development of biocompatible composite hydrogels, structurally similar to native bone tissue, by incorporation of ~60 wt % of calcium hydroxyapatite (HA) into a matrix of hydrogels. Also, ...
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
Microvickers hardness determination of unsaturated polyester resins reinforced with alumina based reinforcement / Ispitivanje mikrotvrdoće nezasićenih poliestarskih smola sa ojačanjima na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Commercial alumina wiskers (Al2O3 w) and synthesized alumina particles via sol-gel technique (Al2O3 m) were used as reinforcement in unsaturated polyester resins (UPR). Composite materials with the addition of 0.1 wt. %, ...