Претраживање
Приказ резултата 31-40 од 105
Influence of annealing temperature on the baking response and corrosion properties of an Al-4.6 wt% Mg alloy with 0.54 wt% Cu
(Elsevier Science Sa, Lausanne, 2015)
The effect of different thermo-mechanical processing parameters on the baking response, and intergranular corrosion (IGC) resistance of an Al-4.6 wt% Mg-0.54 wt% Cu alloy was investigated. It has been shown that the high ...
Comparative life cycle assessment of Ni-based catalyst synthesis processes
(Elsevier Sci Ltd, Oxford, 2017)
Ni-based catalysts supported on ceramics are particularly suitable for industrial applications, for instance reforming of hydrocarbons to produce synthesis gas or hydrogen and production of carbon nanofibers. Conventional ...
Production of enzymes by a newly isolated Bacillus sp TMF-1 in solid state fermentation on agricultural by-products: The evaluation of substrate pretreatment methods
(Elsevier Sci Ltd, Oxford, 2017)
Study on potential of different agro-industrial waste residues for supporting the growth of newly isolated Bacillus sp. TMF-1 strain under solid-state fermentation (SSF) was conducted aiming to produce several industrially ...
The iron(III)-modified natural zeolitic tuff as an adsorbent and carrier for selenium oxyanions
(Elsevier, Amsterdam, 2014)
Se(IV) and Se(VI) anions are the dominant species of Se existing in aqueous systems. In this study, the iron(III)-modified natural zeolitic tuff (Fe-CLI) from the Serbian deposit Zlatokop has been investigated as an adsorbent ...
Trends in Encapsulation Technologies for Delivery of Food Bioactive Compounds
(Springer, New York, 2015)
The food industry expects increasingly complex properties (such as delayed release, stability, thermal protection, and suitable sensorial profile) from food ingredients, which often would not be able to be achieved without ...
Waste animal fats as feedstocks for biodiesel production
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
Biodiesel, an alternate and ecologically acceptable substitute for the conventional fuel, is usually produced from a wide range of edible vegetable oils, which are normally used for human consumption and whose prices are ...
In situ synthesis of Cu/Cu2O nanoparticles on the TEMPO oxidized cotton fabrics
(Springer, Dordrecht, 2018)
In situ synthesis of Cu/Cu2O nanoparticles on the cotton fabric discussed in this study relies on adsorption of Cu2+-ions by carboxylate groups generated through the TEMPO-mediated oxidation of cellulose and their subsequent ...
Effect of Deposition Current Density and Annealing Temperature on the Microstructure, Hardness and Magnetic Properties of Nanostructured Nickel-Iron-Tungsten Alloys
(Electrochemical Soc Inc, Pennington, 2014)
Nanostructured nickel-iron-tungsten alloy coatings were electrodeposited from an ammonia citrate bath on steel and copper substrates at current densities in the range of 50 to 300 mA cm(-2). The contents of iron and tungsten ...
Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2017)
A process of obtaining N-doped TiO2 nanotubes sensitized by CdS nanoparticles is presented, including detailed characterizations performed along the synthesis. Transparent TiO2 films consisting of nanotubes, 2.5 mu m long ...
Nanomechanical and anti-stabbing properties of Kolon fabric composites reinforced with hybrid nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
In this study carbon nanotubes (CNT) and silica nanoparticles (SiO2) were added to enhance the dynamic mechanical and anti-stabbing properties of the polyurethaneip-aramid multiaxial fabric (Kolon fabric) composites for ...