Претраживање
Приказ резултата 51-60 од 219
Effect of the Modified Silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate
(Wiley, Hoboken, 2017)
Unsaturated polyester resin (UPe)-based nanocomposites and fumed silica Aerosil R812S, R805 and R816, and R200 modified with phenyl terminal group, R200NPh, were prepared. UPe resins were synthesized from maleic anhydride ...
Biocontrol and plant stimulating potential of novel strain Bacillus sp. PPM3 isolated from marine sediment
(Academic Press Ltd- Elsevier Science Ltd, London, 2018)
In the current study, the biocontrol potential of a novel strain Bacillus sp. PPM3 isolated from marine sediment from the Red Sea in Hurghada, Egypt is recognized. This novel strain was selected out of 32 isolates based ...
"Do-It-Yourself" reliable pH-stat device by using open-source software, inexpensive hardware and available laboratory equipment
(Public Library Science, San Francisco, 2018)
In this paper, we present the construction of a reliable and inexpensive pH stat device, by using open-source "OpenPhControl" software, inexpensive hardware (a peristaltic and a syringe pump, Arduino, a step motor...), ...
Mechanism and degradation kinetics of zinc complex containing isophthalato and 2,2 '-dipyridylamine ligands under different atmospheres
(Elsevier Masson SAS, 2018)
The design of mixed-ligand complexes are of increasing interest from fundamental as well as technological and curative aspects. Having that in mind, we studied zinc complex containing 2,2'-dipyridylamine (dipya) and dianion ...
Photocatalytic Degradation of Bisphenol A with alpha-Fe2O3 Fibers and Particles
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Two-step synthesis of Fe2O3 particles, performed by precipitation from iron(III) chloride (FeCl3 center dot 6H(2)O) using ammonium hydroxide in first step and calcination at 400 and 700 degrees C during 4 h, provided Fe2O3 ...
Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
A facile synthesis was employed for three polyhedral oligo silsequioxanes (POSS), obtaining incompletely condensed structures with fern-like and cubic morphologies. Proton nuclear magnetic resonance spectroscopy (H-1 NMR) ...
Controlled Curcumin Release from Hydrogel Scaffold Platform Based on 2-Hydroxyethyl Methacrylate/Gelatin/Alginate/Iron(III) Oxide
(Wiley-VCH Verlag Gmbh, Weinheim, 2020)
The strategy of combining polymers of natural and synthetic origin with inorganic components to use their unique synergistic effect for the development of the novel, sophisticated, and efficient 3D polymeric biomaterials, ...
Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air
(Elsevier Science Sa, Lausanne, 2019)
The similar to 60 nm wide and similar to 2 mu m long TiO2 nanotubes were obtained by anodization of Ti films sputtered on F-doped tin oxide glass. For N-doping the samples were annealed in ammonia atmosphere. The effect ...
The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate
(Taylor & Francis Ltd, Abingdon, 2019)
Adhesion behavior between the composite films, consisting of UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina particles, Al2O3 ...
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...