Претраживање
Приказ резултата 61-70 од 226
Novel composite zinc-alginate hydrogels with activated charcoal aimed for potential applications in multifunctional primary wound dressings
(Savez hemijskih inženjera, Beograd, 2019)
Composites based on Zn-alginate hydrogels in the form of beads were produced by extrusion of a suspension containing 0.5 % w/w of alginate and 20 % w/w of activated charcoal (AC) with the intent to simultaneously release ...
Synthesis of α-Al2O3 based foams with improved properties as catalyst carriers
(Institute of Metals and Technology, 2014)
This paper explores the possibility of synthesising catalyst supports with improved properties. Alumina foams were produced with the polymer replication technique. Representative high- and low-temperature sintering ceramics ...
The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers
(Macedonian Journal of Chemistry and Chemical Engineering, 2021)
Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 °C for the process of geopolymerization. ...
Electrostatic extrusion as a dispersion technique for encapsulation of cells and bioactive compounds / Elektrostatička ekstruzija kao disperziona tehnika za inkapsulaciju ćelija i biološki aktivnih supstanci
(Association of Chemical Engineers of Serbia, 2012)
Significant development of cells and bioactive compound encapsulation technologies is taking place due to an exceptional possibility of their application in various scientific disciplines, including biomedicine, pharmacy, ...
Nickel-based catalysts: Dependence of properties on nickel loading and modification with palladium
(Savez hemijskih inženjera, Beograd, 2016)
The aim of this study was comparative analysis of catalysts with 5 and 20 wt.% Ni loading, with and without Pd additive, and it included: determination of reduction degrees, investigation on microstructure by scanning ...
CFD analysis of the influence of centrifugal separator geometry modification on the pulverized coal distribution at the burners
(Transactions of Famena, 2014)
This paper presents the results of 3D numerical flow simulation in the ventilation mill (VM) and air mixture channel (AMC) of Kostolac B power plant, where a centrifugal separator with adjustable blade angle is used. ...
Influence of material velocity on heat generation during linear welding stage of friction stir welding
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material ...
Antimicrobial oxidized hemp fibers with incorporated silver particles / Antimikrobna tempo-oksidisana vlakna konoplje sa inkorporisanim česticama srebra
(Serbian Chemical Society, Belgrade, 2012)
In this study, antimicrobial silver-loaded hemp fibers were prepared by selective TEMPO-mediated oxidation, i.e., oxidation with sodium hypochlorite, catalytic amount of sodium bromide and the 2,2,6,6-tetramethylpipe-ridine-1-oxy ...
Structure and properties of TEMPO-oxidized cotton fibers / Struktura i svojstva TEMPO-oksidisanih vlakana pamuka
(Association of the Chemical Engineers of Serbia, 2012)
In this paper, the influence of the catalytic oxidation using water soluble and stable nitroxyl radical 2,2',6,6'-tetramethylpiperidine-1-oxyl (TEMPO) on the structure and properties of cotton fibers was studied. In ...
Comparative Effects of Span 20 and Span 40 on Liposomes Release Properties
(Walter de Gruyter Gmbh, Berlin, 2017)
Liposomes are known as convenient carriers for a broad range of actives. The release rate of actives can be adjusted/controlled by the addition of different surfactants. The aim of this study was to compare the effects of ...