Search
Now showing items 31-40 of 902
Electrochemical synthesis and corrosion behavior of thin polyaniline-benzoate film on mild steel
(Elsevier Science Sa, Lausanne, 2004)
The electrochemical synthesis and corrosion behavior of polyaniline (PANI) on mild steel from sodium-benzoate solutions were investigated. Thin, adherent, polyaniline films were obtained by anodic oxidation with current ...
Influence of electrode material on gas-filled surge arresters characteristics in gamma and X radiation field
(Natl Inst Optoelectronics, Bucharest-Magurele, 2006)
The aim of this paper is to find the possibility for improvement of gas-filled surge arresters (GFSA) characteristics in y and X radiation field by appropriate choice of electrode materials. For that purpose electrodes ...
Sol-Gel Combustion Synthesis of La-9.33(SiO4)(6)O-2 Oxyapatite
(Taylor & Francis Inc, Philadelphia, 2009)
Synthesis of La-9.33(SiO4)(6)O-2 was performed by a new method that represents the combination of sol-gel and combustion procedures using glycine as the fuel. Syntheses were performed from ethanol-water solutions of oxides ...
Novel biosensor films based on chitosan
(Elsevier Science Bv, Amsterdam, 2016)
Films of chitosan and poly(itaconic acid) in various different ratios have been prepared by membrane casting. The enhancement in the proton conductivity and uptake of water was observed as the content of poly(itaconic acid) ...
Multiphysics modeling of electric-swing adsorption system with in-vessel condensation
(Springer, Dordrecht, 2007)
Mathematical modeling of an Electric-Swing Adsorption (ESA) system (adsorption cycle with electrothermal desorption step, performed by direct heating of the adsorbent particles by passing electric current through them), ...
Oxidized pentacene micro-rods obtained by thermal annealing of pentacene thin films in air
(Pergamon-Elsevier Science Ltd, Oxford, 2017)
Prolonged annealing of pentacene thin films in air leads to the formation of nano- and micro-scale rod-shaped structures at temperatures equal to or higher than 130 degrees C. Scanning electron microscopy measurements ...
Influence of Hydrolysis on the Osmotic Coefficients of the System {yZnCl(2) + (1-y)ZnSO4}(aq) at Temperature 298.15 K
(Amer Chemical Soc, Washington, 2009)
Isopiestic vapor pressure measurements were made for {yZnCl(2) + (1 - y)ZnSO4}(aq) solutions with ZnCl2 ionic strength fractions of y = (0.2640, 0.5042, 0.7533, and 1) at the temperature 298.15 K, using KCl(aq) as the ...
Bioactive glass and hydroxyapatite thin films obtained by pulsed laser deposition
(Elsevier, Amsterdam, 2007)
Bioactive glass (BG), calcium hydroxyapatite (HA), and ZrO2 doped HA thin films were grown by pulsed laser deposition on Ti substrates. An UV KrF* (lambda = 248 nm, tau gt = 7 ns) excimer laser was used for the multi-pulse ...
Shrinkage properties of wool treated with low temperature plasma and chitosan biopolymer
(Textile Research Inst, Princeton, 1999)
Low temperature plasma treatments of wool modify only the cuticle surface of the fibers, improving their surface wettability, dyeability, fiber cohesion, and shrink resistance. The shrink-resist properties obtained with ...
The thermal degradation of some isomers of poly(di-butyl itaconates)
(Elsevier, Amsterdam, 1999)
The non-oxidative and oxidative thermal degradation of poly(di-iso-butyl itaconate) (PDiBI), poly(di-n-butyl itaconate) (PDnBI), and poly(di-sec-butyl itaconate) (PDsBI) were studied by following changes in the polymer ...