Search
Now showing items 1-10 of 37
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance
(Springer, New York, 2020)
Composites based on poly(methyl methacrylate), dimethyl itaconate matrix and alumina particles were prepared. Ferrous oxide-doped alumina particles (Al2O3Fe) and commercial alumina nanoparticles (Al(2)O(3)n) modified with ...
Antimicrobial P(HEMA/IA)/PVP semi-interpenetrating network hydrogels
(Springer, New York, 2013)
New semi-interpenetrating networks (semi-IPNHs) (P(HEMA/IA)/PVP) were prepared by free radical crosslinking copolymerization of 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA, 5 mol%), in the presence of poly(vinyl ...
Multi-level finite element analysis for progressive damage behavior of HA/PEEK composite porous structure
(Elsevier Sci Ltd, Oxford, 2013)
A three-dimensional multi-level finite element (FE) modeling approach has been developed to simulate mechanical response and progressive damage behavior of hydroxyapatite/polyetheretherketone (HA/PEEK) porous structures ...
Quantitative evaluation of sulfur-polymer matrix composite quality
(Elsevier Sci Ltd, Oxford, 2013)
In order to predict service life of the sulfur polymer composite, the samples were subjected to the induced destruction using 10% hydrochloric acid solution. Control specimens were prepared using Portland cement binder. ...
Preparation, characterization and mechanical properties of Bi12SiO20-PMMA composite films
(Elsevier Science Sa, Lausanne, 2014)
This paper investigates processing and characterization of polymer composite material PMMA-Bi12SiO20 (BSO). Thin films of pure PMMA and composites with 0.5 and 1.0 wt% of Bi12SiO20 powder were made using solution casting ...
Bioactive hydroxyapatite/graphene composite coating and its corrosion stability in simulated body fluid
(Elsevier Science Sa, Lausanne, 2015)
The hydroxyapatite/graphene (HAP/Gr) composite was electrodeposited on Ti using the electrophoretic deposition process to obtain uniform bioactive coating with improved mechanical strength and favorable corrosion stability ...
New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties
(Elsevier Sci Ltd, Oxford, 2017)
Influence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based ...
Nanomechanical and anti-stabbing properties of Kolon fabric composites reinforced with hybrid nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
In this study carbon nanotubes (CNT) and silica nanoparticles (SiO2) were added to enhance the dynamic mechanical and anti-stabbing properties of the polyurethaneip-aramid multiaxial fabric (Kolon fabric) composites for ...