Претраживање
Приказ резултата 11-20 од 1558
One-bath One-dye Class Dyeing of PES/Cotton Blends after Corona and Chitosan Treatment
(Korean Fiber Soc, Seoul, 2009)
In this work, the effects of corona discharge (CD) and chitosan treatment on the dyeability of polyester/cotton blends with direct and reactive dyes were studied. The surface chemical changes of polyester and cotton were ...
Plasma-induced Decolorization of Indigo-dyed Denim Fabrics Related to Mechanical Properties and Fiber Surface Morphology
(Sage Publications Ltd, London, 2009)
The aim of this study was to investigate how morphology of fibers is affected by plasma during the process of decolorization by a low-pressure RF plasma (gas, treatment time, and power were varied) and atmospheric pressure ...
Preparation and properties of low cement castable sintered at different temperatures
(University of Novi Sad, 2009)
The low cement high alumina castable (LCC) studied in this paper was synthesised, cured and then treated at different sintering temperatures. Since any inhomogeneity introduced during the castable preparation can remain ...
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...
Polypyrrole as possible electrode materials for the aqueous-based rechargeable zinc batteries
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
Polypyrrole (PPy) thin film electrode was galvanostatically synthesized and characterized in 0.1 M HCI on graphite electrode as cathode materials for the aqueous-based rechargeable zinc batteries. The charge/discharge ...
Thermal shock damage characterization of high temperature ceramics by non destructive test methods
(University of Chemistry and Technology, Prague, 2008)
In the present work a mixture of commercially available spinel, quartz (SiO2) and alumina (Al2O3) corresponding to cordierite stoichiometry was used as starting material for obtaining cordierite/SiC composite ceramics with ...
Synthesis of mesoporous nanocrystalline titania powders by nonhydrolitic sol-gel method
(Academic Press Ltd- Elsevier Science Ltd, London, 2009)
Mesoporous titania with well-crystallized anatase phase was synthesized by nonhydrolytic sol-gel process combined with solvothermal treatment. Titanium-isopropoxide, titanium-tetrachloride, and carbon-tetrachloride were ...
Solubility and Pitzer's ionic parameters in the system H2O-NaCl-MgCl2
(University of Belgrade, Technical Faculty, Bor, 2001)
The object of this work was to determine Pitzer's ionic parameters, θ and Ψ, for the mixed salt solution H2O-NaCl-MgCl2 at following temperatures: 273.15, 298.15, 356.15 and 378.15 K in ionic strength interval from 7 to ...
Mass spectrometric study of some 4-pyrimidine carboxylic acids
(Wiley, Hoboken, 2002)
Mass spectrometry has been applied in order to study the main fragmentation routes of some 4-pyrimidene carboxylic acids. Differences in fragmentation were caused by the nature of the substituent in position 2 of the ...
Prediction of thermal shock behavior of alumina based refractories: Temperature difference, fracture resistance parameters and water quench
(Trans Tech Publications Ltd, Durnten-Zurich, 2001)
In this paper temperature difference and fracture resistance parameters were used for prediction of thermal shock behavior of the samples. Materials were alumina based commercial refractories with different content of Al2O3 ...