Претраживање
Приказ резултата 811-818 од 818
Modeling of the substrate and product transfer coefficients for ethanol fermentation
(WILEY-VCH Verlag GmbH & Co., 2008)
The transfer phenomena of the substrate and product for ethanol fermentation with immobilized biocatalyst were investigated. Fermentation was carried out with a biocatalyst consisting of Ca-alginate gel in the form of ...
Modelling of ductile fracture initiation in strength mismatched welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
In this paper, the effect of strength mismatch and width of the welded joints oil the stress-strain distribution in the crack tip region has been discussed. The single-edge notched bend (SENB) specimens (precrack length ...
Mixed cobalt(III) complexes with aromatic amino acids and diamine: Part V. Thermal investigation of (1,2-diaminoethane)bis(S-tyrosinato)cobalt(III) complex diastereomers
(Elsevier, 2005)
Thermal properties of (1,2-diaminoethane)bis(S-tyrosinato)cobalt(III) complex diastereomers are investigated by means of TG technique in 293-873 K temperature range. This is a first thermal study of [Co(S-aa) 2 en] + (S-aa ...
Thermal properties of textile fabrics made of natural and regenerated cellulose fibers
(Elsevier Sci Ltd, Oxford, 2008)
Cotton (cellulose) and viscose (regenerated cellulose) fibers are commonly applied in clothing textile fabrics. Thanks to the unique hemp (lignocellulose) fibre properties and its ecological benefits (biodegradability), ...
Ultraviolet Protection Factor of Gray-state Plain Cotton Knitted Fabrics
(Sage Publications Ltd, London, 2009)
The protection provided by clothing against ultraviolet (UV) radiation has been the subject of considerable recent research. However, a lack of investigations concerned with the influence of yarn properties on UV protection ...
RF Plasma Treatment of Wool
(Nagoya University, 2001)
SCC Susceptibility and Formability in Relation to Different TMTs of an Al-6.8 wt% Mg Alloy Sheet
(Weinheim : Wiley-WCH verlag GmbH & Co., 2008)
The Al-Mg alloy sheets have been increasingly used for automotive and marine applications as they offer good combination of strength, formability, corrosion resistance and weldability [1-4]. High Mg containing Al-Mg alloys, ...
Influence of Cu on the mechanical properties of an Al-4.4wt%Mg alloy after ECAP
(Trans Tech Publications, Ltd., 2006)
Two Aluminium alloys, type AA5182 and AA5182+1.2wt% Cu, have been studied. The
second alloy in solution treated condition is 18% stronger than the first one. During ageing at 150°C or 200°C it shows a characteristic fast ...