Pretraživanje
Prikaz rezultata 1-10 od 29
Dynamic mechanical properties of aramid fabrics impregnated with multiwalled carbon nanotubes / Dinamičko mehanička svojstva aramidnih lamina impregnisanih sa višeslojnim ugljeničnim nanocevima
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
Carbon nanotubes (CNT) represent allotropes of carbon with a cylindrical nanostructure. In multiwalled carbon nanotubes (MWCNT), graphitic layers make up concentric tubes. The multiwalled nanotubes length in our research ...
Aramid composites impregnated with different reinforcement: Nanofibers, nanoparticles and nanotubes / Aramidni kompoziti impregnisani sa različitim ojačanjima - nanovlakna, nanočestice i nanocevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
In this study, the electrospun nanofibers, nanoparticles and nanotubes were used as reinforcement in order to improve mechanical properties of materials for ballistic protection. The samples of polyurethane/p-aramid ...
Immobilization of peroxidase from fresh horseradish extract for anthraquinone dye decolorization / Imobilizacija peroksidaze iz svežeg ekstrakta rena i primena u dekolorizaciji antrahinonskih boja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthetic dyes are used in all sectors of industry and represent a serious ecological problem. By the presence, anthraquinone dyes are right after the azo dyes. Unlike azo, anthraquinone dyes are considerably harder to ...
Influence of the Fe(III): Modified clinoptilolite on phosphorus leaching from different soil types / Uticaj Fe(III)- modifikovanog klinoptilolita na izluživanje fosfora iz različitih vrsta zemljišta
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Influence of the iron(III)-modified clinoptilolite (FeCLI) on phosphorus leaching from two different Norwegian soil types (sand and clay loam soil) was studied using a column system at room temperature. FeCLI was used in ...
Laser treatments of Nimonic 263 nickel-based superalloy / Laserske obrade superlegure Nimonik 263
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
In this paper, the influence of parameters of laser processing (drilling, cutting, welding and laser shock peening) on microstructure of superalloy Nimonic 263 are investigated. Drilling and welding process are carried out ...
Alkyd nanocomposite coatings based on waste pet glicolyzates and modified silica nanoparticles / Alkid nanokompozitni premazi bazirani na otpadnim pet glikolizatima modifikovani nanočesticama silike
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Synthesis of high-performance alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates were synthesized by catalytic depolymerization with trimethylolpropane (TMP) ...
Corrosion of an archaeological find from the Roman period in Serbia / Korozija arheoloških eksponata iz rimskog perioda u Srbiji
(Inženjersko društvo za koroziju, Beograd, 2012)
The degree of preservation of iron artifacts depends on the type of underground environment and the type of corrosion products formed on their surface. This paper analyses the conditions of an archaeological find made of ...
Structural properties of carbon microspheres obtained by hydrothermal treatment of fructose / Strukturne osobine mikrosfera ugljenika dobijenih hidrotermičkim tretmanom fruktoze
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
A carbon-rich solid product has been synthesized by hydrothermal treatment from fructose with HNO3 at temperature of 140°C. The concentration of the precursor was changed in order to investigate how its change influences ...
Contributions of impregnated silver nanoparticles to ideality increase of filtration material in human respiratory protection / Doprinos impregnisanih nanočestica srebra porastu idealnosti filtrirajućih sredstava respiratorne zaštite
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
A technical contradiction arises when within a system one parameter improves thus automatically causing another one to worsen. In a situation like this, instead of a usual acceptance of compromise which leads to optimization ...
Production of rubber plasticizers based on waste PET: Techno-economical aspect / Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), ...