Претраживање
Приказ резултата 51-60 од 996
Adsorption of azo dyes on polymer materials / Adsorpcija azo boja na polimernim materijalima
(Association of Chemical Engineers of Serbia, 2013)
The use of polymeric adsorbents for the removal of azo dyes from solution has been reviewed. Adsorption techniques are widely used to remove certain classes of pollutants from waters, especially those which are not easily ...
Multipurpose nonwoven viscose/polypropylene fabrics: Effect of fabric characteristics on sorption and dielectric properties
(Wiley, Hoboken, 2018)
In this work, sorption and dielectric properties of viscose/polypropylene multipurpose nonwoven fabrics were examined. The analysis of sorption behavior showed that the changes of the water absorptive capacity, the height ...
Microstructure of new composite electrocatalyst and its anodic behavior for chlorine and oxygen evolution
(Elsevier Sci Ltd, Oxford, 2012)
The first layer of active coating made from a rutile-structured solid solution of ruthenium and titanium dioxides having an average crystal grain size of 30 nm was thermally deposited on an adequately prepared titanium ...
Influence of the gelation and calcination temperatures on physical parameters and photocatalytic activity of mesoporous titania powders synthesized by the nonhydrolytic sol-gel process
(Elsevier, Amsterdam, 2012)
Titania powders were synthesized by nonhydrolitic sol-gel process starting from titanium(IV)-chloride, titanium(IV)-isopropoxide and carbon-tetrachloride. Gelation was performed in solvothermal conditions, at 140 degrees ...
Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution
(Association of Metallurgical Engineers of Serbia, 2013)
In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The ...
The impact of manufacturing process on the content of hard triglycerides, hardness and thermal properties of milk chocolate
(Savez hemijskih inženjera, Beograd, 2012)
The rheological and physical properties of the chocolate mass depend on the ingredient composition as well as the manufacturing process. For the purpose of this work, a milk chocolate mass of identical composition and raw ...
Removal of textile dyes from water by TiO2 nanoparticles immobilized on poly(epsilon-caprolactone) beads and foams
(Srpsko hemijsko društvo, Beograd, 2018)
Isopiestic determination of the osmotic and activity coefficients of the {yKNO(3) + (1-y)K2HPO4}(aq) system at T=298.15 K
(Academic Press Ltd- Elsevier Science Ltd, London, 2012)
The osmotic coefficients of aqueous mixtures of KNO3 and K2HPO4 have been measured at T = (298.15 +/- 0.01) K by the isopiestic vapor pressure method at KNO3 ionic strength fractions y = (0.20581, 0.43631, 0.61099, and ...
The influence of the size and surface modification of TIO2 nanoparticles on the rheological properties of alkyd resin / Uticaj veličine nanočestica TIO2 i njihove površinske modifikacije na reološka svojstva alkidne smole
(Association of Chemical Engineers of Serbia, 2013)
Spherical TiO2 particles of different size were dispersed in alkyd resin based on soybean oil. Four samples of TiO2 particles were used, three commercial and one obtained by acid catalyzed hydrolysis of titanium ...
Diffusion of drugs in hydrogels based on (meth)acrylates, poly(alkylene glycol) (meth)acrylates and itaconic acid / Difuzija lekova u hidrogelovima na bazi (met)akrilata, poli(alkilenglikol)-(met)akrilata i itakonske kiseline
(Association of Chemical Engineers of Serbia, 2012)
The aim of this paper is to propose equations for the diffusion of drugs for investigated drug/hydrogel systems using the parameters affecting the transport of drug through poly- (2-hydroxyethylmethacrylate/itaconic acid) ...