Приказ основних података о документу
The Effect of Acrylate on the Properties and Machinability of Alumina Ceramics
dc.creator | Kokunešoski, Maja | |
dc.creator | Janaćković, Đorđe | |
dc.creator | Kićević, Dušan | |
dc.creator | Ilić, Svetlana | |
dc.creator | Šaponjić, Aleksandra | |
dc.date.accessioned | 2023-06-19T08:43:12Z | |
dc.date.available | 2023-06-19T08:43:12Z | |
dc.date.issued | 2023 | |
dc.identifier.issn | 0350-820X | |
dc.identifier.uri | http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6468 | |
dc.description.abstract | Effect of methyl methacrylate (MMA) as a binder and heating treatment were investigated to improve green alumina compacts machinability. Properties of green compacts and their corresponding sintered samples prepared with and without MMA were compared. Investigation of green and sintered properties was performed on samples compacted at applied pressures up to 150 MPa. After pressing, samples with MMA were thermally treated at 115oC. The intention was to enhance the polymerization of MMA at a temperature a little higher than the glass transition temperature (Tg = 103°C) of poly (methyl methacrylate). Green compacts with MMA had higher green density values than those without MMA. Sintered samples with MMA had lower values of sintered density and higher values of total porosity; after sintering, relative linear shrinkage was around 15 % for the whole range of applied pressures. The possibility of easily machining the green compacts with MMA produces great possibilities for application in many fields. | sr |
dc.description.abstract | Испитиван je утицај метил метакрилата (ММА) као везива као и утицај термичког третманана машинску обрадивост испресака од алумине. Упоређена су својства како код испресака од алумине припремљених са и без ММА тако и код њима одговарајућих синтерованих узорака. Испитивање особина испресака и синтерованих узоракаизведено је на узорцима који су испресовани на притисцима до 150 МРа. Након пресовања, узорци са ММА су термички третирани на 115о С са намером да ММА полимеризује на нешто вишој температури од температуре стакластог прелаза (Тg = 103°C) поли(метил метакрилата. Испресци са ММА имали су веће густине од испресака без ММА. Синтеровани узорци припремљени са ММА имали су ниже синтероване густине и већу укупну порозност, aнакон синтеровања, релативно линеарно скупљање је било око 15 % за цео опсег примењених притисака пресовања. Пробе машинске обрадљивости показале су да машинска обрада испресака са ММА има велике могућности за комерцијалну примену. | sr |
dc.language.iso | en | sr |
dc.publisher | International Institute for the Science of Sintering (IISS) | sr |
dc.relation | info:eu-repo/grantAgreement/MESTD/inst-2020/200017/RS// | sr |
dc.rights | openAccess | sr |
dc.rights.uri | https://creativecommons.org/licenses/by/4.0/ | |
dc.source | Science of Sintering | sr |
dc.subject | Acrylic binder | sr |
dc.subject | Alumina ceramics | sr |
dc.subject | Machining | sr |
dc.subject | Thermal treatment | sr |
dc.subject | акрилно везиво | sr |
dc.subject | алумина | sr |
dc.subject | машинска обрада | sr |
dc.subject | термички третман | sr |
dc.title | The Effect of Acrylate on the Properties and Machinability of Alumina Ceramics | sr |
dc.type | article | sr |
dc.rights.license | BY | sr |
dc.citation.epage | 113 | |
dc.citation.issue | 1 | |
dc.citation.rank | M22~ | |
dc.citation.spage | 103 | |
dc.citation.volume | 55 | |
dc.identifier.doi | 10.2298/SOS2301103K | |
dc.identifier.fulltext | http://TechnoRep.tmf.bg.ac.rs/bitstream/id/17333/The_Effect_of_Acrylate_pub_2023.pdf | |
dc.identifier.scopus | 2-s2.0-85161040023 | |
dc.type.version | publishedVersion | sr |