Претраживање
Приказ резултата 21-30 од 64
Mathematical modeling of zinc ions biosorption by short hemp fibers / Matematičko modelovanje procesa biosorpcije jona cinka kratkim vlaknima konoplje
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2013)
Waste hemp fibers were used as an efficient biosorbent for removal of zinc ions from polluted water. In order to obtain the material with better sorption properties, short hemp fibers were chemically modified. The following ...
The influence of different supplements on the probiotic character of fermented whey-based beverage / Uticaj različitih dodataka na probiotski karakter fermentisanog napitka na bazi surutke
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2013)
The aim of this study was the selection of appropriate supplements for the probiotic whey-based beverage production by Lactobacillus johnsonii NRRL B-2178. The analysis of the main effects and their interactions was performed ...
Numerical simulation of the plunge stage in friction stir welding alloys EN AW 2024 T 351 and EN AW 7049A T 652 / Numerička simulacija faze probijanja postupka zavarivanja trenjem mešanjem legura EN AW 2024 T 351 i EN AW 7049A T 652
(Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Institut za proizvodno mašinstvo, Novi Sad, 2011)
This paper investigates the plunge stage using numerical modeling. Change of temperature and plunge force have been analyzed during the plunge stage of the FSW procedure for high hardness aluminum alloys EN AW 2024 T 351 ...
Biomedical fibrous materials PP/viscose with programmed properties as transdermal systems / Biomedicinski vlaknasti materijali polipropilen/viskoza programiranih svojstava kao transdermalni sistem
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2013)
The subject of this paper is the behaviour of the biomedical fibrous materials in the form of transdermal sistem for wound dressing, consisting of a nonwoven textile base which contains polypropylene (PP) / viscose, a ...
Thermal comfort behavior of hemp based knitted fabrics / Ponašanje pletenina na bazi konoplje u pogledu toplotnog komfora
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2011)
The hemp fibres production is characterized by sharp ups and downs, from the extensively growing to their decline in the past decades. Thanks to the unique hemp fibre properties, such as physiological, hygienic and ecological ...
Internet application for project management in industrial systems / Internet aplikacija za upravljanje projektima u industrijskim sistemima
(Institut za istrazivanja i projektovanja u privredi, 2010)
An efficient way to collect, analyze and transfer the project information, as well as tracking and coordination of information exchange are crucial for successful project finalization in industrial companies. Project members ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Inženjersko društvo za koroziju, Beograd, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Welding technology of aluminium alloys using friction stir welding / Tehnologija zavarivanja aluminijumskih legura postupkom zavarivanja trenjem alatom
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2010)
The objective of this paper is a development of welding technology of aluminium alloys by Friction Stir Welding (FSW). FSW is a very modern welding process with a great future use, primarily due to a variety of possible ...
SiC synthesis using domestic mineral resources
(University of Novi Sad, 2011)
The possibility of using domestic Mg-silicate (sepiolite, white) as Si source and novolac resin (as carbon source), for synthesis of fine β-SiC powder at relatively low temperatures (1673-1873 K), was demonstrated. Obtained ...
Hydroxyapatite coatings on TiO2 nanotubes / Prevlake hidroksiapatita na nanotubama oksida titana
(Engineering Society for Corrosion, Belgrade, Serbia, 2010)
The aim of this work was to obtain nanotubular TiO2 layer by anodization of titanium substrate, and to prepare hydroxyapatite (HAP) coatings by electrophoretic deposition over nanotubular TiO2 layer. The presence of fluoride ...