Претраживање
Приказ резултата 1-10 од 20
Novel device for determining the effect of jetting shear on the stability of inkjet ink
(Journal of Print and Media Technology Research, 2021)
Inkjet printing is a rapidly expanding technology for non-contact digital printing. The focus for the technology has changed from office printing of text and image documents increasingly toward wider applications, including ...
Simulation of velocity profile inside turbulent boundary layer
(Association of Metallurgical Engineers of Serbia, 2020)
The second-order differential equation with a general polynomial solution [1], is adapted for simulation of complex velocity profile inside the turbulent boundary layer. Consequently, the simulation strategy is suggested.
Effect of process parameters on the phase transformation kinetics in copper-based alloys and composites
(Metallurgical & Materials Engineering, 2020)
Copper-based alloys and composites, owing to their convenient properties, are being considered essential materials in various industries. Since copper possesses an ability to develop high corrosion resistance, putting it ...
Estimation of phosphorus distribution ratio at the end of blowing in bof
(Metallurgical & Materials Engineering, 2021)
In integrated steel plants, the removal of phosphorous normally takes place during the primary basic oxygen furnace (BOF) steelmaking process. Phosphorous is usually introduced to the integrated steelmaking process through ...
Algorithm for quantifying the particle size distribution of non-metallic inclusions formation in steel production
(Metallurgical & Materials Engineering, 2021)
When the quantitative characterization of non-metallic inclusions in steel is done and the effect of limiting factors is assessed, and based on that the possibility of reconstruction of the total content of non-metallic ...
Modeling of disperse dye adsorption on modified polyester fibers
(University of Novi Sad, Faculty of Technology, 2020)
The results of the research on the ability of adsorption of dye on polyester fibers at a temperature of 98 °C are presented in this paper. The fibers were previously modified in aqueous solutions of NaOH, KOH or Al(OH)3. ...
Cavitation resistance of basalt-based protective coatings and epoxy system
(Structural Integrity and Life-Integritet I Vek Konstrukcija, 2021)
The paper presents the results of synthesis and characterization of new refractory coatings based on basalt and epoxy system. Coatings are intended to protect the surfaces of parts of equipment and various structures in ...
Effect of corn straw pretreatment on efficiency of biogas production process: Computer simulation
(Institut za istrazivanja i projektovanja u privredi, 2020)
Anaerobic digestion is a natural process of organic material degradation by different kinds of microorganisms in the absence of oxygen. This process is used for industrial purpose to manage waste streams or to produce ...
Contribution to the Serbian coal ranking and fly ash characterization using Pb isotopic ratio
(The Netherlands Press, 2022)
The Republic of Serbia generates the majority of its electricity at the thermal power plants (TE) Nikola Tesla, Kolubara, and Kostolac. Coal is extracted from the Kolubara basin, which produces approximately 70% of lignite ...
An overview of application of micromechanical models in ductile fracture analysis of welded joints
(Srpsko društvo za mehaniku, Beograd, 2020)
Fracture of welded joints has been an important research and industrial topic for a long time, having in mind the key role of welded joints in ensuring the safe operation and integrity of welded structures. This work ...