Претраживање
Приказ резултата 1-10 од 54
Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy
(John Wiley & Sons, Chichester, 2012)
This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 ...
Laboratory testing results of kinetics and processing technology of the polymetallic sulphide concentrate Blagojev kamen - Serbia
(141st Annual Meeting and Exhibition, TMS 2012, 2012)
This work presents the laboratory testing results of kinetics the oxidation process and sample processing of the sulphide polymetallic concentrate Blagojev Kamen. The aim of investigation is recovery of these types of raw ...
The effect of Ni content on passivation of copper anodes with non-standard chemical composition
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2012)
In this paper are presented the results of the first appearance of full pasivation during the treatment of the waste sulphuric-acid solution generated in the conventional copper electrorefining process. The copper anodes ...
Microindentation hardness testing of different composite systems with thin electrodeposited nickel and copper films
(Belgrade : Military Technical Institute, 2012)
Thin Ni and Cu films with fine-grained structures have been electrodeposited from self-made sulphamate-based and sulphate-based electrolytes, respectively. DC electrodeposition of Ni films was performed on single crystal ...
The influence of current density on charge/discharge characteristics of polyaniline electrode
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2012)
Polyaniline (PANI) was electrochemically synthesized on graphite electrode galvanostaticaly from aqueous solution of 0.25 mol dm-3 aniline and 0.5 mol dm-3 p-toluenesulfonic acid. Charge capacity available for the exchange ...
Study of lipase-catalyzed synthesis of ascorbyl oleate using response surface methodology
(6th Central European Congress on Food, CEFood 2012, 2012)
L-ascorbic acid has good antioxidative properties but its efficiency in stabilizing fats and oils in products with high lipid content is negligible due to its hydrophilic characteristics. On the other hand, fatty acid ...
Mechanochemically synthesized CaO·ZnO catalyst for biodiesel production
(20th International Congress of Chemical and Process Engineering, CHISA 2012 and 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2012, 2012)
The transesterification of triglycerides (vegetable oil) with methanol using CaO·ZnO mixed oxides catalyst were conducted to produce Fatty Acid Methyl Esters (FAME), i.e. biodiesel. The catalysts were used in the methanolysis ...
Decopperization process of waste solutions from conventional copper electrolysis
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2012)
This paper is adresses on treatment of sulphuric acid waste solutions obtained during the conventional copper metallurgical activities. Mother liquor is a part of this solutions and it is generated during the regeneration ...
Application of nonlinear frequency response method for investigation of periodically operated chemical reactors
(Beograd : Mathematical Institute SANU, 2012)
Process intensification aims to increase the efficiency of processes in the chemical industry by development of new concepts of processing methods and equipments. One way to achieve better performance is to operate the ...