Претраживање
Приказ резултата 261-270 од 281
Micromechanical analysis of fatigue and crack growth in carbon-fiber epoxy composites based on mechanical testing
(Savez hemijskih inženjera, Beograd, 2020)
The paper presents static and dynamic tests of carbon/epoxy composite materials with fiber orientation at 0 degrees/90 degrees and +/- 45 degrees. The main tensile properties were determined as a basis for subsequent dynamic ...
Thermal treatment of composite wastes for energy recovery / Termički tretman otpadnih kompozitnih materijala u cilju dobijanja energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
The expression waste-to-energy technologies is increasingly being used regarding waste reduction and utilization. Waste-to-energy technologies are procedures used to generate different forms of energy starting from a waste ...
Quantitative comparison of iron and cobalt based catalysts for the Fischer-Tropsch synthesis under clean and poisoning conditions
(Elsevier, Amsterdam, 2020)
Quantitative data comparing iron and cobalt based catalysts for the Fischer-Tropsch synthesis (FTS) are scarce due to the fact that these two kinds of catalysts typically utilize different process conditions. This paper ...
Fabrication of bacterial cellulose-based wound dressings with improved performance by impregnation with alginate
(Elsevier, Amsterdam, 2020)
Bacterial cellulose (BC) hydrogels are among the most efficient materials already being used for the treatment of complex wounds. The moist environment provided by the BC dressing is a key feature assuring efficient wound ...
Optimization of forced periodic operations in milli-scale fixed bed reactor for Fischer-Tropsch synthesis
(Elsevier, Amsterdam, 2020)
One-dimensional pseudo-homogenous dynamic reactor model, incorporating detailed Fischer-Tropsch kinetics, was applied in a theoretical analysis of forced periodic operations. A milli-scale fixed-bed reactor was analyzed, ...
Effect of plasma treatment on chemical composition, structure and sorption properties of lignocellulosic hemp fibers (Cannabis sativa L.)
(Elsevier Sci Ltd, Oxford, 2020)
Hemp fibers with different amount of hemicelluloses and lignin were subjected to atmospheric pressure dielectric barrier discharge under different conditions (40 W and 80 W power of discharge, const. time 120 s) in order ...
Metal-loaded zeolite remediation of soils contaminated with pandrug-resistant Acinetobacter baumannii
(Inst Medical Research & Occupational Health, Zagreb, 2020)
Due to the development of resistance to antimicrobial agents, bacterium Acinetobacter baumannii is nowadays a leading cause of nosocomial outbreaks. Clinically relevant A. baumannii outside hospital settings including ...
Production of sub-micro sized silver particles by chemical reduction method in an environmentally-friendly manner
(Savez inženjera metalurgije Srbije, Beograd, 2020)
Silver nitrate in the solution was reduced in the presence of the dispersants by ascorbic acid, and silver particles were generated. The main goal was to examine the influence of different dispersants. The purpose was to ...
Polymer composite films and nanofibers doped with core-shell quantum dots
(Natl Inst Optoelectronics, Bucharest-Magurele, 2020)
Processing and characterization of polymer nanocomposites based on poly(methyl methacrylate) (PMMA) matrix with embedded core-shell CdSe/ZnS quantum dots were investigated. Nanocomposites were obtained via solution casting ...
The effect of incompletely condensed polyhedral oligomeric silsesquioxanes (POSS) on hybrid film adhesion
(Elsevier Sci Ltd, Oxford, 2020)
The objective of this study was to investigate the influence of polyhedral oligomeric silsesquioxane (POSS) structure on the adhesion behaviour of composite films onto a metallic surface. The composite films consisted of ...