Претраживање
Приказ резултата 11-20 од 390
Conservation of resources in the pulp and paper industry derived from cleaner production approach
(Resources Conservation and Recycling, 2011)
This paper analyses the utilization of water and recycled fiber from waste paper for the production in one Serbian cardboard mill. Water and fiber consumption, wastewater generation and its characteristics, as well as ...
Diffusion and solubility of commercial poly(methyl methacrylate) denture base material modified with dimethyl itaconate and di-n-butyl itaconate during water absorption/desorption cycles
(Wiley-Blackwell, Hoboken, 2012)
This study evaluated the water absorption, solubility, kinetics of water diffusion and residual monomer content of commercial poly(methyl methacrylate) (PMMA) denture base material modified with dimethyl itaconate (DMI) ...
Recovery of (-)-epigallocatechingallate (EGCG) from aqueous solution by selective adsorption onto spent coffee grounds
(Springer, New York, 2015)
Activated carbons from spent coffee grounds have been prepared for column adsorption of main green tea polyphenol (-)-epigallocatechingallate (EGCG). The response surface methodology was used to estimate the influence of ...
Adding Value to the Oil Cake as a Waste from Oil Processing Industry: Production of Lipase and Protease by Candida utilis in Solid State Fermentation
(Springer, New York, 2012)
Olive oil cake is a by-product from the olive oil processing industry and can be used for the lipase and protease production by Candida utilis in solid state fermentation. Different carbon and nitrogen sources were evaluated, ...
Removal of nickel(II) ions from aqueous solutions using the natural clinoptilolite and preparation of nano-NiO on the exhausted clinoptilolite
(Elsevier Science Bv, Amsterdam, 2010)
The natural zeolite tuff (clinoptilolite) from a Serbian deposit has been studied as adsorbent for Ni(II) ions from aqueous solutions. Its sorption capacity at 298K varies from 1.9mg Nig(-1) (for the initial solution ...
Structure investigation of fluorinated aluminophosphate ULM-3 Al templated by 3-methylaminopropylamine
(Academic Press Inc Elsevier Science, San Diego, 2010)
A single-crystal X-ray diffraction analysis of an open-framework aluminophosphate ULM-3 Al prepared by 3-methylaminopropylamine (MAPA) as structure-directing agent revealed an orthorhombic Pcab symmetry (a=9.9949(4)angstrom, ...
A synthesis of N-alkyl and N,N-dialkyl O-ethyl thiocarbamates from diethyl dixanthogenate using different oxidants
(Springer Wien, Wien, 2010)
A novel synthesis of N-alkyl and N,N-dialkyl O-ethyl thiocarbamates from diethyl dixanthogenate and primary and secondary amines, using three oxidizing systems, has been developed on the laboratory scale, and the method ...
Precipitation Processes in Al-Mg-(Mn,Cu) Type Alloy Sheets Evaluated Through Electrical Resistivity Variations
(Springer/Plenum Publishers, New York, 2010)
Precipitation/dissolution processes were followed by electrical resistivity variations in Al-Mg-(Mn)-Cu and Al-Mg-Mn type alloy sheets after different thermo-mechanical treatments (TMTs). In order to get an insight into ...
The effect of applied current density on the surface morphology of deposited calcium phosphate coatings on titanium
(Elsevier, Amsterdam, 2012)
Electrochemical deposition of calcium phosphate coatings on titanium was performed galvanostatically from the aqueous solution of Ca(NO3)(2) and NH4H2PO4 with the current densities between 5.0 and 10 mA cm(-2), for different ...
Microwave sintering improves the mechanical properties of biphasic calcium phosphates from hydroxyapatite microspheres produced from hydrothermal processing
(Springer, New York, 2010)
Starting from two microspherical agglomerated HAP powders, porous biphasic HAP/TCP bioceramics were obtained by microwave sintering. During the sintering the HAP powders turned into biphasic mixtures, whereby HAP was the ...