Search
Now showing items 1201-1210 of 1214
Validation of a novel perfusion bioreactor system in cancer research
(Savez hemijskih inženjera, Beograd, 2020)
Development of drugs is a complex, time- and cost-consuming process due to the lack of standardized and reliable characterization techniques and models. Traditionally, drug screening is based on in vitro analysis using ...
Polymer composite films and nanofibers doped with core-shell quantum dots
(Natl Inst Optoelectronics, Bucharest-Magurele, 2020)
Processing and characterization of polymer nanocomposites based on poly(methyl methacrylate) (PMMA) matrix with embedded core-shell CdSe/ZnS quantum dots were investigated. Nanocomposites were obtained via solution casting ...
Influence of the precursor chemical composition on heavy metal adsorption properties of hemp (Cannabis Sativa) fibers based biocarbon
(Srpsko hemijsko društvo, Beograd, 2017)
Waste hemp (Cannabis sativa) fibers were used as sustainable and renewable raw materials for production of low-cost biocarbon sorbent for heavy metals removal. Carbon precursors of different chemical composition were ...
The physicochemical properties of the deep eutectic solvents with triethanolamine as a major component
(Srpsko hemijsko društvo, Beograd, 2020)
Different deep eutectic solvents (DESs) of triethanolamine (TEOA) and oxalic acid (OA), glacial acetic acid (AA), L-(+)-lactic acid (LA), oleic acid (OLA), glycerol (G), ethylene glycol (EG), propylene glycol (PEG), choline ...
Micromechanical analysis of fatigue and crack growth in carbon-fiber epoxy composites based on mechanical testing
(Savez hemijskih inženjera, Beograd, 2020)
The paper presents static and dynamic tests of carbon/epoxy composite materials with fiber orientation at 0 degrees/90 degrees and +/- 45 degrees. The main tensile properties were determined as a basis for subsequent dynamic ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Zinc oxide nanoparticles prepared by thermal decomposition of zinc benzenepolycarboxylato precursors: Photoluminescent, photocatalytic and antimicrobial properties / Наночестични прахови цинк-оксида добијени термичком деградацијом цинк-бензенполикарбоксилато прекурсора: фотолуминесцентна, фотокаталитичка и антимикробна својства
(Serbian Chemical Society, 2020)
Zinc oxide (ZnO) nanoparticles were obtained by thermal decomposition of one-dimensional zinc-benzenepolycarboxylato complexes as single-source precursors at 450 °C in an air atmosphere. The mechanism and kinetics of thermal ...
Adsorption performances and antimicrobial activity of the nanosilver modified montmorillonite clay
(Desalination Publ, Hopkinton, 2020)
The synthesis and adsorption potential of Cy-npAg, obtained by modification of raw montmorillonite clay (raw-Cy) with silver nanoparticle (npAg), was studied in this work. Optimization procedure, with respect to time, ...
Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution
(Desalination Publ, Hopkinton, 2020)
The adsorption performance of three-dimensionally ordered macroporous (3DOM) alumina doped with iron oxide, and subsequently modified with (3-aminopropyl)triethoxysilane (APTES), FeAl2O3 and FeAl(2)O(3)APTES, was used for ...
High-temperature and high-pressure (p, rho, T) measurements and derived thermodynamic properties of 1-octyl-3-methylimidazolium hexafluorophosphate
(Srpsko hemijsko društvo, Beograd, 2020)
Densities of ionic liquid (IL) 1-octyl-3-methylimidazolium hexafluorophosphate [OMIM][PF6] at high temperatures and high pressures were measured. The measurements were made along 10 isotherms over a temperature range T = ...