Претраживање
Приказ резултата 1-10 од 108
Tensile strength properties of hybrid magnetic composite materials / Zatezna čvrstoća hibridnih magnetnih kompozitnih materijala
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The Nd-Fe-B-barium ferrite hybrid composite materials with epoxy matrix presented in this paper cover maximum energy product from 1 to 13 MGOe. Mixture of magnetic particles is responsible for high magnetic quality, while ...
Influence of the Fe(III): Modified clinoptilolite on phosphorus leaching from different soil types / Uticaj Fe(III)- modifikovanog klinoptilolita na izluživanje fosfora iz različitih vrsta zemljišta
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Influence of the iron(III)-modified clinoptilolite (FeCLI) on phosphorus leaching from two different Norwegian soil types (sand and clay loam soil) was studied using a column system at room temperature. FeCLI was used in ...
Immobilization of peroxidase from fresh horseradish extract for anthraquinone dye decolorization / Imobilizacija peroksidaze iz svežeg ekstrakta rena i primena u dekolorizaciji antrahinonskih boja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthetic dyes are used in all sectors of industry and represent a serious ecological problem. By the presence, anthraquinone dyes are right after the azo dyes. Unlike azo, anthraquinone dyes are considerably harder to ...
Elektrohemijska oksidacija jodid-jona u vodenim rastvorima
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
The electrochemical reaction of iodine ions oxidation was investigated in order to estimate the optimal conditions for electrolysis. The anodic polarization curves were determined in solutions of different KI concentration: ...
Application of permeable materials for CBRN protective equipment / Primena filtrosorpcionih materijala za NHB zaštitnu opremu
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The new concept of chemical, biological, radiological and nuclear combat clothing offers the opportunity of substantial cost savings by eliminating the need for additional, CBRN over garments, whose high weight and poor ...
Molybdenum recovery as alloying agent from waste molybdenum solution
(Engineers Society of Corrosion, Belgrade, 2018)
The present work reports the commercialization of a recycling process of spent acid from filament
tungsten wire plant to recover molybdenum (VI)-oxide and further utilizing this product for alloying
cast iron. First part ...
Oxygen reduction reaction on electrochemically deposited sub-monolayers and ultra-thin layers of Pt on (Nb-Ti)2AlC substrate / Reakcija redukcije kiseonika na elektrohemijski istaloženim tankim slojevima platine na (Nb-Ti)2alc nosaču
(Engineers Society for Corrosion, 2022)
Catalytic activity towards the oxygen reduction reaction (ORR) in 0.5 M H2SO4 was investigated at sub-monolayers and ultra-thin layers (corresponding to 10, 30 and 100 monolayers, (MLs)) of Pt electrochemically deposited ...
Hemp fibers (Cannabis sativa) impregnated by Ca-alginate gel as a novel biosorbent for the removal of Pb(II) and Zn(II) ions / Novi biosorbent na bazi vlakna konoplje (Cannabis sativa) i Ca-alginata za uklanjanje jona olova i cinka
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper the possibility of implementing the new biosorbent composed of chemically modified short hemp fibers impregnated with alginate gel for adsorption of lead(II) and zinc (II) ions was investigated. Waste hemp ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Micromechanical fracture analysis of laminated glass-epoxy composite material tested by bending / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog savijanjem
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The object and purpose of this work is the micromechanical analysis of failures caused by mechanical tests of laminate glass-epoxy composite material in bending. The structure of glass-epoxy composite material is a glass ...