Претраживање
Приказ резултата 1-10 од 149
Encapsulation of resveratrol in spherical particles of food grade hydrogels / Inkapsulacija resveratrola u sferične čestice na bazi hidrogelova dozvoljenih za upotrebu u hrani
(Institute for Food Technology, Novi Sad, 2017)
The paper reports about the preparation and characterization of hydrogel particles containing liposomes loaded with resveratrol as an active compound. The materials used for preparation of the particles were chosen to be ...
Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate) / Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization ...
Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution
(Association of Metallurgical Engineers of Serbia, 2016)
Based on the analysis of the non-standard iron-bearing raw materials treatment process and the results of real composition measurements of the flue gas, the study of hazards by identification of harmful substances that ...
Applicability of risk-based maintenance strategy to a penstock / Strategija održavanja zasnovana na riziku - primenljivost na cevovod
(Society for Structural Integrity and Life, Institute for Material Testing, 2012)
The risk of brittle fracture of the penstock of the reversible pump turbine is recognized in an early stage of design. To reduce the cost of penstock construction one tunnel is accepted. The HSLA steel of 700 MPa yield ...
The influence of chloride anions on the pitting corrosion of aluminum alloy en 46000 / Uticaj hloridnih anjona na tačkastu koroziju legure aluminijuma en 46000
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
The corrosion behavior of AlSi9Cu3 aluminum alloy, which is commonly used for manufacturing radiators of remote central heating systems, is investigated. The tendency for pitting corrosion is investigated in the phosphate ...
Ni-pd/al(2)o(3) catalyst supported on reticulated ceramic foam for dry methane reforming
(Savez inženjera metalurgije Srbije, Beograd, 2015)
In the present study, Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam was prepared and evaluated in the dry methane reforming process. Corresponding metal chlorides were deposited to the foam surface by impregnation ...
Laboratory testing results of kinetics and processing technology of the polymetallic sulphide concentrate Blagojev Kamen - Serbia
(Association of Metallurgical Engineers of Serbia, 2016)
This work presents the laboratory testing results of kinetics the oxidation process and sample processing of the sulphide polymetallic concentrate Blagojev Kamen. The aim of investigation is recovery of these types of raw ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
Influence of the fabrication process of copper matrix composites on cavitation erosion resistance
(Savez inženjera metalurgije Srbije, Beograd, 2017)
Copper matrix composites reinforced with ZrB2 particles were produced in two ways: by hot pressing (HP) and laser-sintering process. Powder mixture Cu-Zr-B was mechanically alloyed before densification processes. Variations ...
Alkyd nanocomposite coatings based on waste pet glicolyzates and modified silica nanoparticles / Alkid nanokompozitni premazi bazirani na otpadnim pet glikolizatima modifikovani nanočesticama silike
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Synthesis of high-performance alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates were synthesized by catalytic depolymerization with trimethylolpropane (TMP) ...