Претраживање
Приказ резултата 5391-5400 од 5414
Comparative Study on Cavitation Erosion Resistance of A356 Alloy and A356FA5 Composite
(Springer India, New Delhi, 2017)
In the present study, an aluminum alloy A356 composite with addition of 5 wt% fly ash was synthesized and subjected to the cavitation erosion resistance test in order to find out if this material can be used in conditions ...
Synthesis and characterization of porous tungsten carbide with added tungsten silicides
(Elsevier Sci Ltd, Oxford, 2018)
Porous materials made of commercial tungsten carbide (WC) with the addition of thermally obtained tungsten silicides (WSi2 and W5Si3) were made. The main research's contribution is firstly finding optimal conditions for ...
Effect of alumina based particles on mechanical properties and resistance to acryloid composites cavitation / Uticaj čestica na bazi aluminijum oksida na mehanička svojstva i otpornost na kavitaciju akriloidnih kompozita
(Savez inženjera i tehničara Srbije, Beograd, 2018)
In the processes of preservation and restoration of sculptures and archaeological objects, copolymer materials of acrylate type are used because they have proved useful in conservation practice. The main disadvantage of ...
Denture composite reinforced with short polyethylene terephthalate fibers
(John Wiley and Sons Inc., 2022)
Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair ...
Basalt-Polyester Hybrid Composite Materials for Demanding Wear Applications
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2020)
Basalt as a filler in a polymer-based composite material fulfils the demand of being natural, environment-friendly material for the production of various composite materials. The material could be used as protective layer ...
Properties of green self-compacting concrete deigned by particle packing density method
(Sisak, Croatia : Association for Promotion of Holistic Approach to Environment, 2023)
Since depletion of natural resources and the amount of construction and demolition waste haveovercome the socially and environmentally acceptable level, the construction industry must address this issue and reduce its ...
HISTORICAL OVERVIEW OF REFRACTORY LINING IN THE BLAST FURNACE
(Association of Metallurgical Engineers of Serbia, 2022)
The majority of refractories used today are associated with the iron and steel industries. Typically, the refractory lining of a blast furnace consists of a combination of different refractory materials chosen for different ...
Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses
(Elsevier Science Bv, Amsterdam, 2018)
In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory ...
Impact of Nanocellulose Loading on the Crystal Structure, Morphology and Properties of PVDF/Magnetite@NC/BaTiO3 Multi-component Hybrid Ceramic/Polymer Composite Material
(Springer, 2023)
The hybrid multifunctional magnetic organic/inorganic composite materials, with addition of optimal filler type and quantities are attractive due to wide range of potential application, from various pressure sensors, through ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...