Претраживање
Приказ резултата 21-30 од 45
Experimental and numerical investigations of the critical values of J-integral for the steel of steam pipelines
(Elsevier Science Bv, Amsterdam, 2018)
Steel grade 14MoV6-3 is a low-carbon microalloyed steel with addition of chromium and molybdenum. This grade is designed mainly for power industry applications, withstanding operating at elevated temperatures.In this paper, ...
Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances
(Wiley-VCH Verlag Gmbh, Weinheim, 2018)
Unsaturated fatty acid (FA)-modified nanocellulose (m-NC) shows potential application in improving mechanical properties of unsaturated polyester/m-NC nanocomposites (UPe/m-NC). A polyester matrix is obtained by polycondensation ...
The influence of silver, copper and zinc ions on the properties of bioceramic materials based on calcium phosphate / Uticaj jona srebra, bakra i cinka na svojstva biokeramičkih materijala na bazi kalcijum-hidroksiapatita i kalcijum-fosfata
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
Calcium phosphates constitute the inorganic part of bones and teeth of mammals. This fact is well known and has encouraged researchers to apply hydroxyapatite (HAp, Ca10(PO4)6(OH)2) and tricalcium phosphate (TCP, Ca3(PO4)2), ...
High strength thermoresponsive semi-IPN hydrogels reinforced with nanoclays
(Wiley Periodicals, Inc., 2012)
Two series of nanoclay reinforced, thermoresponsive hydrogels were prepared, one based on poly(N-isopropylacrylamide) (PNIPA) and the other on semi-interpenetrating networks containing PNIPA and poly(N-vinyl pyrrolidone) ...
Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging / Otpornost aluminijumske legure serije 7000 prema naponskoj koroziji posle dvostepenog termičkog taloženja
(Association of the Chemical Engineers of Serbia, 2015)
The effect of one-step and a new (short) two-step aging process on the resistance to stress corrosion cracking of an aluminum alloy 7000 series was investigated, using slow strain rate test and fracture mechanics method. ...
Synthesis and characterisation of hybrid polymer composite materials based on wood. / Sinteza i karakterizacija hibridnih polimernih kompozita na bazi drveta
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2019)
The focus of this doctoral dissertation is the preparation and characterization of wood-plastic composites (WPC), whereby a new method of obtaining hybrid polymer composites based on wood from solution and forming the final ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
Wash-dry cycle induced changes in low-ordered parts of regenerated cellulosic fibers
(Wiley-Blackwell, Hoboken, 2012)
Three regenerated cellulosic fiber types: lyocell, viscose, and modal were subjected to repetitive wetdry treatments. Simulated treatments showed reorganization of the internal fiber structure which could be determined by ...
Synthesis of α-Al2O3 based foams with improved properties as catalyst carriers
(Institute of Metals and Technology, 2014)
This paper explores the possibility of synthesising catalyst supports with improved properties. Alumina foams were produced with the polymer replication technique. Representative high- and low-temperature sintering ceramics ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...