Претраживање
Приказ резултата 31-40 од 98
Failure analysis of rotary screw pump / Analiza havarije rotacione vijčane pumpe
(Society for Structural Integrity and Life, Institute for Material Testing, 2009)
A case study of damage of a rotary high-pressure three screw oil hydraulic pump for regulator oil in hydroelectric power plant is presented. Results of chemical composition analysis, mechanical properties, impact energy ...
Micromechanical and structural properties of nickel coatings electrodeposited on two different substrates / Mikromehanička i strukturna svojstva elektrodeponovanih prevlaka nikla na različitim supstratima
(Serbian Chemical Society, Belgrade, 2009)
Fine-structured nickel coatings were electrodeposited from a sulfamate-based electrolyte onto different substrates: polycrystalline cold-rolled copper and single crystal silicon with (111) orientation. The influence of the ...
The influence of bonding agents in improving interactions in composite propellants, determined using the FTIR spectra / Uticaj vezujućih agenasa na poboljšanje interakcija u kompozitnim gorivima utvrđen korišćenjem FTIR spektara
(Military Technical Institute, Belgrade, 2009)
Bonding agents synthesized in this research are 1, 3, 5-trisubstituted isocyanurates (substituents: 2-hydroxyethyl, 3-hydroxypropyl, 2-hydroxypropyl and 2, 3-epoxypropyl). All syntheses reactions were carried out according ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Design and optimization of purification procedure for biodiesel washing
(Association of the Chemical Engineers of Serbia, 2009)
Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst) followed by the washing procedure ...
Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources
(Elsevier Sci Ltd, Oxford, 2009)
Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol ...
Matrix Microstructure and Its Micro-Analysis of Constituent Phases in As-Cast Fe-Cr-C-V Alloys
(Japan Inst Metals, Sendai, 2009)
The as-cast matrix microstructure in 19 mass%Cr-2.8 mass%C white cast iron with up to 4.7 mass% V additions has been studied. Type and degree of the austenite transformation in the course of cooling after solidification ...
The analysis of different processes of extraction: yield of extracts obtained from Aloe vera (Aloe barbadensis Miller) and sweet bay (Laurus nobilis L.) and the exergy analysis of applied processes
(Association of the Chemical Engineers of Serbia, 2009)
The present study was aimed to investigate and compare the efficiency of different methods for the isolation extract from a plant material. Extracts from dried leaves of Aloe vera (A. barbadensis Mill.) and Sweet Bay (Laurus ...
The ultrasonic and image analysis method for non-destructive quantification of the thermal shock damage in refractory specimens
(Elsevier Sci Ltd, Oxford, 2009)
In the present work, Mg-exchanged zeolit and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 50:50. Samples were exposed to the water quench test from 950 ...
Optimization of the procedure for the synthesis of calcium lactate pentahydrate in laboratory and semi-industrial conditions / Optimizacija postupka sinteze kalcijum-laktat pentahidrata u laboratorijskim i poluindustrijskim uslovima
(Association of Chemical Engineers of Serbia, 2009)
This paper is concerned on the development of the optimal laboratory procedure for the synthesis of calcium lactate pentahydrate and the application of obtained results in a project for a semi-industrial installation for ...