Претраживање
Приказ резултата 11-20 од 140
Procedure of solidification and stabilization of heavy metals from mine waste waters adsorbed on fly ash pellets into enviromentally acceptable building material / Postupak solidifkacije i stabilizacije teških metala iz otpadnih rudničkih voda adsorbovanih na peletama u ekološki prihvatljiv građevinski materijal pepela
(Zavod za intelektualnu svojinu Republike Srbije, 2020)
Stabilization of heavy metals, especially copper, from acidic mine wastewater is performed by their solidification into sulfur polymer concrete as an environmentally acceptable building material. The procedure is carried ...
Thermo-responsive hydrogels based on poly(N-isopropyl- acrylamide) and hyaluronic acid cross-linked with nanoclays
(Srpsko hemijsko društvo, Beograd, 2020)
Semi-interpenetrating polymer networks (SIPN) based on thermo-responsive poly(N-isopropylacrylamide) (PNIPA) and water-soluble sodium salts of linear hyaluronic acid (Na-HA) were physically cross-linked with synthetic ...
Amides as a model system of low molar mass algal organic matter. Influence on the adsorption of p-nitrophenol on activated carbon
(Elsevier, Amsterdam, 2020)
In this study, the adsorption equilibrium and diffusivity parameters of p-nitrophenol were estimated for water containing different concentrations of secondary amides. Commercial powdered activated carbon was used as an ...
A detailed experimental and computational study of monocarbohydrazones
(Elsevier, Amsterdam, 2020)
The substituent and solvent effect on intramolecular charge transfer (ICT) of twelve monocarbohydrazones (mCHs) were studied using experimental and theoretical methodology. The effects of specific and non-specific ...
New Eco-Friendly Xanthate-Based Flotation Agents
(MDPI, Basel, 2020)
An optimal laboratory two-step procedure was developed for sodium/potassium O-alkyl carbonodithioate (sodium/potassium alkyl xanthates) production in the form of aqueous solutions. Sodium isopropyl xanthate (Na-iPrX), as ...
Lead isotope ratios as tool for elucidation of chemical environment in a system of Macrolepiota procera (Scop.) Singer - soil
(Springer Nature, 2020)
The analysis of isotope ratios of lead in the mushrooms and soil, where they were grown, assisted with a principal component analysis, offered a new perspective for understanding possible chemical environment in a real ...
Applying concept of 3d printing concrete in wind tower construction / Primena koncepta 3d štampe betona u izradi vetrogeneratora
(Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, 2020)
Although a most prominent material in contemporary construction practice due to its’ obvious advantages, concrete incorporates a number of drawbacks. It is one of the most advantageous principles for decades to enable a ...
ANN prediction of the efficiency of the decolourisation of organic dyes in wastewater by plasma needle
(Srpsko hemijsko društvo, Beograd, 2020)
In this paper, the results of decolourisation of Reactive Orange 16 (RO 16), Reactive Blue 19 (RB 19) and Direct Red 28 (DR 28) textile dyes in aqueous solution by plasma needle are presented. Treatment time, feed gas flow ...
Photocatalytic degradation of methylene blue under natural sunlight using iron titanate nanoparticles prepared by a modified sol-gel method
(Royal Soc, London, 2020)
The aim of this work was to synthesize semiconducting oxide nanoparticles using a simple method with low production cost to be applied in natural sunlight for photocatalytic degradation of pollutants in waste water. Iron ...
Eco-friendly technology for gel-coat and fireproofing material production using bio-renewable and waste materials
(OOO «Centr «AЮMЭLЬ», 2020)
Innovative technology has been developed for the production of gelcoat and materials of reduced flammability based on unsaturated polyester resins. These materials were synthesized from raw materials obtained from waste ...