Претраживање
Приказ резултата 21-29 од 29
Preparation and characterization of 3D printed bone scaffold for ibuprofen delivery / 3D štampa i karakterizacija nosača za dostavu ibuprofena u koštanom tkivu
(Savez farmaceutskih udruženja Srbije, 2022)
In this work, a blend of gelatin A (GA) and polyvinylpyrrolidone (PVP K30) was used for semi-solid 3D printing of bone scaffold for ibuprofen (IBU) delivery. The cross-linking of the obtained scaffold was performed with a ...
Bilansiranje energetskih tokova u životnom ciklusu proizvodnje toplotne energije iz biogasa / Balancing of energy flows in a life cycle of thermal energy production from biogas
(Inženjersko društvo za koroziju, 2021)
Biogas predstavlja obećavajući izvor za dobijanje energije u budućim energetskim sistemima. U
ovom radu sprovedeno je razmatranje energetskih tokova u životnom ciklusu realnog biogasnog
postrojenja (Mirotin-Vrbas) za ...
Functionalization of PLA Aerogels with TiO2 Nanoparticles / Funkcionalizacija PLA aerogelova pomoću TiO2 nanočestica
(Savez inženjera i tehničara Srbije, 2021)
This study was aimed to prepare material with high porosity and photocatalytic activity by immobilization of TiO2 nanoparticles (NPs) onto poly(lactic acid) (PLA) aerogels. PLA aerogels were prepared in three steps: (1) ...
SupercriticaL CO2 extraction of oils from red grape varieties: yields and extraction parameters / Ekstrakcija ulja iz semenki crvenih sorti grožđa natkritičnim CO2. Prinosi i parametri ekstrakcije
(University of Niš, Serbia, 2021)
In this work, the extraction by supercritical carbon dioxide of grapeseed oil from five red grape varieties was investigated. Apart from an indigenous variety Prokupac, as the domestic, and Merlot and Cabernet Sauvignon, ...
Characterization of NiAl layers deposited by atmospheric plasma spray (APS) / Karakterizacija NiAl slojeva deponovanih atmosferskim plazma sprejom (APS)
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
In this paper analyzed were the mechanical properties and microstructure of the Ni30Al coating layers deposited using atmospheric plasma spray (APS). For deposition of the coating applied was a composite Ni30wt.% Al powder, ...
Immobilization of heavy metal ions Zn2+, Ni2+, Pb2+ and Cu2+ in the structure of cement-based materials / Imobilizacija teških metalnih jona Zn2+, Ni2+, Pb2+ i Cu2+ u strukturi materijala na bazi cementa
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
Natural zeolite and bentonite were utilized as mineral additives in the mix-design of environmentally safe cement-based building materials. The adsorptive abilities of these two clayey raw materials, i.e. their affinity ...
Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants / Karakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata
(Inženjersko društvo za koroziju, 2021)
The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended ...
Thermal treatment of composite wastes for energy recovery / Termički tretman otpadnih kompozitnih materijala u cilju dobijanja energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
The expression waste-to-energy technologies is increasingly being used regarding waste reduction and utilization. Waste-to-energy technologies are procedures used to generate different forms of energy starting from a waste ...
An overview on the application of supercritical carbon dioxide for the processing of pharmaceuticals / Pregled mogućnosti primene natkritičnog ugljenik(IV)-oksida u proizvodnji lekova
(Pharmaceutical Association of Serbia, 2022)
Supercritical carbon dioxide (scCO2) application in the pharmaceutical industry is still undeveloped regardless of significant research interests in this processing medium shown in the last decades. ScCO2 technologies can ...