Претраживање
Приказ резултата 21-30 од 378
Estimation of residual strength of a crack-containing welded pressure vessel exposed to a subzero operating temperature
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
This paper presents a method for estimating the residual-strength of welded pressure vessel made of HSLA steel which contains a surface axial crack. In order to analyze the behavior of the structure, a set of specimens ...
Investigation of the dynamics of fluidized bed granulation process / Ispitivanje dinamike granulacije praškastih materijala u fluidizovanom sloju
(Serbian Chemical Society, Belgrade, 2019)
In this paper, experimental investigation of the dynamics of the process of fluidized bed granulation was performed, in order to find optimal process conditions and binder concentration to achieve the desired granules ...
Use of up-flow percolation test to assess the environmental properties of raw and treated fly ash
(Gheorghe Asachi Technical University of Iasi, Romania, 2019)
Fly ash (FA) is a by-product created from the burning of coal in thermal power plants. FA mainly consists of mineral compounds that make them naturally caustic. Despite this, research has shown that FA may be utilized as ...
Design of an amino-functionalized chelating macroporous copolymer poly(GMA-co-EGDMA) for the sorption of Cu(II) ions
(Srpsko hemijsko društvo, Beograd, 2019)
Polymer-based, highly porous nanocomposites with functionalized ligands attached to the core structure are extremely efficient in the detection, removal and recovery of metals through the process of sorption. Quantum-chemical ...
Influence of Mechanical Activation of a Cordierite-Based Filler on Sedimentation Stability of Lost Foam Refractory Coatings
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
For the development of the Lost Foam refractory coatings with controlled rheologic properties, the influence of the mechanical activation process on the cordierite-based filler's properties change was examined. First of ...
Back to basics: avoiding errors in scientific research and publications
(Savez hemijskih inženjera, Beograd, 2019)
Intensification of a chemical reactor for methanol synthesis through forced periodic operations- Evaluation based on Nonlinear Frequency Response Analysis
(2nd International Process Intensification Conference, Leuven, Belgium, 2019)
In this work, the NFR method is implemented for evaluation of possible improvement for the reaction of methanol synthesis by hydrogenation of CO and CO2, using a standard Cu/ZnO/Al2O3 catalyst. For start, a forced periodically ...
Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
(Springer Heidelberg, Heidelberg, 2019)
Iron oxide, in the form of magnetite (MG)-functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous ...
Industrial steel waste as an iron source to promote heterogeneous and homogeneous oxidation/reduction reactions
(Elsevier Sci Ltd, Oxford, 2019)
This work examines the mill scale (MS) of hot rolling, a waste product formed in industrial steel processing. MS was evaluated as an iron source in promoting the oxidation of Reactive Red 120 azo dye in location-sourced ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin ...