Претраживање
Приказ резултата 111-120 од 132
KIT-5-Assisted Synthesis of Mesoporous SnO2 for High-Performance Humidity Sensors with a Swift Response/Recovery Speed
(MDPI, 2023)
Developing highly efficient semiconductor metal oxide (SMOX) sensors capable of accurate and fast responses to environmental humidity is still a challenging task. In addition to a not so pronounced sensitivity to relative ...
Thermodynamic Properties of Caffeine in Ethylene Glycol at High Pressures and High Temperatures
(American Chemical Society, 2022)
Ethylene glycol is recognized as a heat transfer fluid. To improve its performance, caffeine is added to pure ethylene glycol. The experimental measurements of densities at pressures of up to 60 MPa and in the range of ...
Thermochemical conversion of non-edible fruit waste for dye removal from wastewater
(Springer Science and Business Media Deutschland GmbH, 2023)
In this study, slow pyrolysis was employed for the thermochemical conversion of peach stones (PS), lignocellulosic waste (LCW) from food industry, to prepare biochar (PS-B), a new and efficient sorbent for the removal of ...
Synthesis of novel pyridinium based compounds and their possible application in dye-sensitized solar cells
(Elsevier B.V., 2023)
Five novel D-π-A structured pyridinium based compounds, bearing different electron-donating units were synthesized, minutely characterized, and their solvatochromic and electronic properties were investigated. Subsequently, ...
Radiological and Structural Characterization of Raw and Alkali-Activated Wood Ash and Metakaolin Blends
(MDPI, 2022)
The aim of the presented research was to investigate the application possibility of wood ash and metakaolin to obtain alkali-activated materials as relatively new materials in the building industry. Thus, in order to assess ...
Cerium lactate as green corrosion inhibitor of AA2024 alloy
(John Wiley and Sons Inc., 2023)
This paper evaluated the inhibitory effect of Ce-chloride and Na-lactate mixture on the AA2024 aluminum alloy in 0.1 M NaCl solution. Electrochemical impedance spectroscopy (EIS) was applied for testing the general corrosion ...
Antimicrobial and UV protective chitosan/lignin multilayer nanocoating with immobilized silver nanoparticles
(John Wiley and Sons Inc., 2023)
Poor antimicrobial activity and lack of protection against UV irradiation are weaknesses of cotton textiles. In an attempt to impart superior antimicrobial and UV-protective properties to cotton, layer-by-layer deposition ...
Easy, Flexible and Standardizable Anti-Nascent Biofilm Activity Assay to Assess Implant Materials
(MDPI, 2023)
Medical implants have improved the quality of life of many patients. However, surgical intervention may eventually lead to implant microbial contamination. The aims of this research were to develop an easy, robust, ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Microwave-induced synthesis of zinc-phthalocyanine with improved photosensitizing potential
(Materials Letters, 2023)
In this paper, an efficient and environmentally friendly approach to the microwave-assisted synthesis of zincphthalocyanine (ZnPc) was developed to compare the features and changes in morphology, phase, and opticalproperties ...