Претраживање
Приказ резултата 21-30 од 174
Comparative analysis of the chemical composition and antimicrobal activities of some of Lamiaceae family species and eucaliptus (Eucaliptus globules M) / Komparativna analiza hemijskog sastava i antimikrobne aktivnosti nekih etarskih ulja familije Lamiaceae i etarskog ulja eukaliptusa (Eucaliptus globules M)
(Faculty of Technology, Novi Sad, 2014)
The aim of this study was to evaluate and compare the antimicrobial activity of four essential oils that belong to Lamiaceae family (sage, oregano, thyme) and eucalyptus oil. Gas chromatography coupled with mass spectrometry ...
Procedures for processing of copper secondary raw materials / Postupci prerade sekundarnih sirovina bakra
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
The technological procedures for copper secondary raw materials processing include two basic stages: pretreatment of the copper waste and its further metallurgical processing. For copper waste pretreatment technology, there ...
Modeling of the matrix porosity influence on the elastic properties of particulate biocomposites / Modeliranje uticaja matrične poroznosti na elastične osobine poroznih biokompozita
(University of Belgrade - Faculty of Mechanical Engineering, Belgrade, 2012)
For a wide range of engineering structures such as ceramics, porous shape memory alloys, foam-like structures and thermal spray deposits, porous materials have been used. Recently, porous biocomposites for the applications ...
Microstructural characterization of glass-epoxy composites subjected to tensile testing / Mikromehanička karakterizacija staklo-epoksi kompozita izloženog zateznom opterećenju
(Faculty of Technology, Novi Sad, 2013)
The main objective of the research presented in this paper was to carry out a statistical-mechanical analysis concerning the tensile test of glass-epoxy composite materials in order to calculate their relevant tension ...
Corrosion properties of an aluminium alloy 7000 series after a new two step precipitation hardening / Otpornost prema koroziji aluminijumske legure serije 7000 posle novog dvostepenog termičkog taloženja
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Corrosion properties of an aluminium alloy 7000 series were investigated by different electrochemical methods. The alloy was subjected to the one-step and to a new two-step precipitation hardening. Polarization measurements ...
Basic principles and applications of photoelectrochemical reactions / Osnovni principi i primena fotoelektrohemijskih reakcija
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The paper discusses the basic principles of photoelectrochemistry and photo electrochemical reactions. Considered the application photoelectrochemicl cells in the conversion of the sun iradiation energy into electricity. ...
Effect of process parameters on the phase transformation kinetics in copper-based alloys and composites
(Metallurgical & Materials Engineering, 2020)
Copper-based alloys and composites, owing to their convenient properties, are being considered essential materials in various industries. Since copper possesses an ability to develop high corrosion resistance, putting it ...
Modelling and optimization of surfactant sensor response characteristics for the use in surface water and wastewater analysis / Modelovanje i optimizovanje održivih karakteristika tenzidnog senzora za korišćenje pri analizi površinskih i otpadnih voda
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The theoretical model of potentiometric titration curves of sodium dodecyl sulfate (anionic surfactant) was proposed and the response parameters of two surfactant sensors (commercial and self-made) were investigated. The ...
Time: Temperature superposition principle: Application of WLF equation in polymer analysis and composites / Princip superponiranja vremena i temperature - primena WLF jednačine za ispitivanje polimera i kompozita
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Polymers are the most studied viscoelastic material. The shorter times (high frequencies) corresponding to lower temperatures and long times (low frequencies) to high temperatures. This represents the quantitatively applied ...
CO tolerant Pt/Ru0.7Ti0.3O2 nanocatalyst for hydrogen oxidation reaction / Pt/Ru0,7Ti0,3O2 kao nanokatalizator za oksidaciju vodonika i njegova tolerancija na CO
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
The oxidation of pure H2 and H2/CO mixture (100 ppm CO) was investigated on Pt nanocatalyst supported on Ru0.7Ti0.3O2 (Pt /Ru0.7Ti0.3O2) by linear sweep voltammetry at a rotating disc electrode in 0.1 M HClO4. The results ...