Претраживање
Приказ резултата 11-20 од 390
Precipitation Processes in Al-Mg-(Mn,Cu) Type Alloy Sheets Evaluated Through Electrical Resistivity Variations
(Springer/Plenum Publishers, New York, 2010)
Precipitation/dissolution processes were followed by electrical resistivity variations in Al-Mg-(Mn)-Cu and Al-Mg-Mn type alloy sheets after different thermo-mechanical treatments (TMTs). In order to get an insight into ...
Studies on adhesion characteristics and corrosion behaviour of vinyltriethoxysilane/epoxy coating protective system on aluminium
(Elsevier Science Bv, Amsterdam, 2010)
The corrosion stability of vinyltriethoxysilane/epoxy coating protective system on aluminium is strongly related to the strength of bonds forming at the metal/organic coating interface. This article is a study of adhesion, ...
Synthesis of N-(3-and 4-substituted phenyl)-O-isobutyl thionocarbamates from O-isobutyl xanthate and amines using a nano-platinum multi-walled carbon nanotube catalyst
(Springer Wien, Wien, 2011)
Twelve N-(3- and 4-substituted phenyl)-O-isobutyl thionocarbamates, eight of which are novel, were synthesized from O-isobutyl xanthate and 3- and 4-substituted anilines in the presence of a nano-platinum aminophenyl ...
Recovery of (-)-epigallocatechingallate (EGCG) from aqueous solution by selective adsorption onto spent coffee grounds
(Springer, New York, 2015)
Activated carbons from spent coffee grounds have been prepared for column adsorption of main green tea polyphenol (-)-epigallocatechingallate (EGCG). The response surface methodology was used to estimate the influence of ...
Adding Value to the Oil Cake as a Waste from Oil Processing Industry: Production of Lipase and Protease by Candida utilis in Solid State Fermentation
(Springer, New York, 2012)
Olive oil cake is a by-product from the olive oil processing industry and can be used for the lipase and protease production by Candida utilis in solid state fermentation. Different carbon and nitrogen sources were evaluated, ...
Effects of Filler Content on Mechanical Properties of Macroporous Composites
(Vsp Bv, Leiden, 2010)
The mechanical properties of hydroxyapatite related macroporous biocomposites (MPBs) are influenced by a number of factors, such as the pore size, the filler content and the properties of the matrix and the inclusion. ...
Influence of Corona Discharge and Chitosan Surface Treatment on Dyeing Properties of Wool
(John Wiley & Sons Inc, Hoboken, 2010)
In this work, the effects of single and combined corona discharge (CD) and biopolymer chitosan treatment (CS) on the sorption properties and dyeability of woolen fabric were studied. Physical and chemical changes on the ...
A synthesis of N-alkyl and N,N-dialkyl O-ethyl thiocarbamates from diethyl dixanthogenate using different oxidants
(Springer Wien, Wien, 2010)
A novel synthesis of N-alkyl and N,N-dialkyl O-ethyl thiocarbamates from diethyl dixanthogenate and primary and secondary amines, using three oxidizing systems, has been developed on the laboratory scale, and the method ...
Cloud Point Phenomena in the (Aniline or N,N-Dimethylaniline plus Water) Solutions, and Cosolvent Effects of Liquid Poly(ethylene glycol) Addition: Experimental Measurements and Modeling
(Amer Chemical Soc, Washington, 2015)
In this work, liquid phase behavior (cloud point phenomena) was studied for two binary and four aqueous pseudobinary systems containing aniline or N,N-dimethylaniline and poly(ethylene glycol) 200 Or poly(ethylene glycol) ...
Influence of periodate oxidation on sorption properties of viscose yarn
(Editura Acad Romane, Bucuresti, 2018)
Viscose yarn was submitted to oxidation using different sodium periodate concentrations for various periods of time in order to investigate the influence of oxidation on the chemical and sorption properties of the resulting ...