Search
Now showing items 1-10 of 98
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Design and optimization of purification procedure for biodiesel washing
(Association of the Chemical Engineers of Serbia, 2009)
Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst) followed by the washing procedure ...
Optimization of the procedure for the synthesis of calcium lactate pentahydrate in laboratory and semi-industrial conditions / Optimizacija postupka sinteze kalcijum-laktat pentahidrata u laboratorijskim i poluindustrijskim uslovima
(Association of Chemical Engineers of Serbia, 2009)
This paper is concerned on the development of the optimal laboratory procedure for the synthesis of calcium lactate pentahydrate and the application of obtained results in a project for a semi-industrial installation for ...
Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources
(Elsevier Sci Ltd, Oxford, 2009)
Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol ...
Failure analysis of rotary screw pump / Analiza havarije rotacione vijčane pumpe
(Society for Structural Integrity and Life, Institute for Material Testing, 2009)
A case study of damage of a rotary high-pressure three screw oil hydraulic pump for regulator oil in hydroelectric power plant is presented. Results of chemical composition analysis, mechanical properties, impact energy ...
Hydrometallurgical process for extraction of metals from electronic waste, Part I: Material characterization and process option selection
(Savez inženjera metalurgije Srbije, Beograd, 2009)
Used electronic equipment became one of the fastest growing waste streams in the world. In the past two decades recycling of printed circuit boards (PCBs) has been based on pyrometallurgy, highly polluting recycling ...
Supercritical carbon dioxide extraction of antioxidants from rosemary (Rosmarinus officinalis L.) and sage (Salvia officinalis L.) / Natkritična ekstrakcija antioksidanasa iz ruzmarina (Rosmarinus officinalis L.) i žalfije (Salvia officinalis L.)
(Serbian Chemical Society, Belgrade, 2009)
The aim of the present study was to isolate and characterize antioxidant extracts obtained from dried leaves of rosemary (Rosmarinus officinalis L.) and sage (Salvia officinalis L.), originating from the southern Balkan ...
Smart hydrogels based on itaconic acid for biomedical application / Inteligentni hidrogelovi na bazi itakonske kiseline za biomedicinsku primenu
(Association of Chemical Engineers of Serbia, 2009)
pH and temperature sensitive hydrogels, based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) copolymers, were prepared by gamma irradiation and characterized in order to examine their potential use in biomedical ...
The effect of the concentration of the reacting ion on the control of the electrodeposition process / Uticaj koncentracije reagujućeg jona na kontrolu procesa elektrohemijskog taloženja
(Serbian Chemical Society, Belgrade, 2009)
The effect of the concentration of the reacting ion on the nature of the control of the electrodeposition process was investigated by digital simulation of the polarization curve using the Newman form of the polarization ...
Influence of Cu and Mn content on the properties of Al-Mg4.5-(Mn,Cu) type alloy sheets
(Savez inženjera metalurgije Srbije, Beograd, 2009)
Influence of Cu and Mn content on the grain structure, precipitation effects and mechanical properties of two Al-Mg4.5-(Mn,Cu) type sheets was considered. It was found that a variety of grain size can be obtained in alloy ...