Search
Now showing items 1-10 of 20
Prediction of single particle settling velocities through liquid fluidized beds
(Powder Technology, 2009)
Single particle settling velocities through water fluidized beds of mono-sized glass spheres (dp = 0.645, 1.20, 1.94, 2.98 and 5 mm in diameter) were studied experimentally using a column, 40 mm in diameter. The settling ...
Prediction of the choking velocity and voidage in vertical pneumatic conveying of coarse particles
(Elsevier, 2006)
A method for predicting the choking velocity and voidage in vertical pneumatic conveying of coarse particles is developed and verified using the data obtained in this study as well as the data of Capes and Nakamura [C.E. ...
Properties of quenched LiFePO4/C powder obtained via cellulose matrix-assisted method
(Powder Technology, 2013)
In this study, nanocrystalline LiFePO4/C composite powder has been synthesized via a cellulose matrix-assisted method. In an experiment conducted under extreme conditions involving rapid heating, short high-temperature ...
Morphologies of electrochemically formed copper powder particles and their dependence on the quantity of evolved hydrogen
(Elsevier Science Sa, Lausanne, 2008)
Copper powder particles formed by electrolysis under different quantities of evolved hydrogen were analyzed using the scanning electron microscopy (SEM) technique. It was found that the structure of the powder particles ...
Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents
(Elsevier Science Bv, Amsterdam, 2017)
The magnetic nanocomposites (MNCs), used as adsorbents for Cd2+ ions, were prepared by a co-precipitation method using both the untreated natural (SEP) and the partially acid-activated (ASEP) sepiolites as supports for ...
Static holdup in Gas - Flowing solids - Fixed bed contactors
(Elsevier Science Bv, Amsterdam, 2009)
Static holdup was investigated experimentally and theoretically in gas - flowing solids - fixed bed bench-scale contactors. Diverse packing elements were used: Raschig rings, ceramic beads, crushed stone and glass beads. ...
Influence of synthesis parameters on the structure of boehmite sol particles
(Elsevier, Amsterdam, 2003)
Influence of the type and amount of acid, used for aluminium hydroxide peptization, on the crystallinity and specific surface area of the dispersed phase of boehmite sols as well as the pH of sols, was investigated. The ...
Mass transfer in vertical liquid-solids flow of coarse particles
(Elsevier Science Bv, Amsterdam, 2009)
Wall-to-bed mass transfer in the hydraulic transport of spherical glass particles was studied. The experiments were performed by transporting spherical glass particles 1.20, 1.94 and 2.98 mm in diameter with water in a ...
Wall effects on the velocities of a single sphere settling in a stagnant and counter-current fluid and rising in a co-current fluid
(Elsevier, Amsterdam, 2010)
Experimental results were obtained on the steady settling of spheres in quiescent media in a range of cylindrical tubes to ascertain the wall effects over a relatively wide range of Reynolds number values. For practical ...
Influence of the gelation and calcination temperatures on physical parameters and photocatalytic activity of mesoporous titania powders synthesized by the nonhydrolytic sol-gel process
(Elsevier, Amsterdam, 2012)
Titania powders were synthesized by nonhydrolitic sol-gel process starting from titanium(IV)-chloride, titanium(IV)-isopropoxide and carbon-tetrachloride. Gelation was performed in solvothermal conditions, at 140 degrees ...