Претраживање
Приказ резултата 1-10 од 22
The influence of thin benzoate-doped polyaniline coatings on corrosion protection of mild steel in different environments
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2013)
The corrosion process of mild steel in the presence of benzoate-doped polyaniline coatings exposed to 3% NaCl has been investigated. This system was also tested for cathodic protection and it has proven more efficient ...
Savremeni čelici - dvojnikovanjem izazvana plastičnost
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
A significant increase in the research activity dedicated to high manganese TWIP steels has occurred during the past few years, motivated by the breakthrough combination of strength and ductility possessed by these alloys. ...
Economizer water-wall damages initiated by feedwater impurities
(Savez hemijskih inženjera, Beograd, 2014)
The main causes of efficiency loss in thermal power plants are boiler tube failures that diminish unit reliability and availability, and raise the cost of the electric energy. For that reason, the regular examination of ...
Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate) / Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin ...
The Corrosion Behavior of an Ag43Cu37Zn20 Alloy in the Natural Seawaters
(Japan Inst Metals, Sendai, 2015)
We investigated the effects of natural seawater on the corrosion of an Ag43Cu37Zn20 alloy. The alloy was a commercial brazing filler alloy of composition (BS1845:1984 Ag5) and belongs to the class of Cd-free silver brazing ...
Oxidation and erosion behaviour of SiC-HfC multilayered composite
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2014)
The fabrication of SiC-HfC ceramic composite via self-propagating high-temperature synthesis and simultaneous consolidation was investigated. Dense composite consisting of alternating layers of SiC and HfC was obtained by ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Srpsko hemijsko društvo, Beograd, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Electrochemical and surface characterization of ternary alloys of the system Ag-Cu-Zn in near neutral chloride solutions. / Elektrohemijska i površinska karakterizacija trokomponentnih legura sistema Ag-Cu-Zn u blisko neutralnim hloridnim rastvorima
(Univerzitet u Beogradu, Tehnički fakultet, Bor, 2015)
Alloys of the Ag-Cu-Zn system with wide range of silver content, selected to have similar phase compositions, were the subject of the research. Metals for all examined alloys are obtained by recycling of electronic waste. ...
Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes
(Nice : International Society of Electrochemistry, 2010)
Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 ...